Pneu and Aku tools with gun technology, Page 5
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Product sorting
List of products
Accessories for SG990 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.4 mm nozzle version.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.
The tire inflator is used for easy filling of compressed air into tires of cars, motorcycles, bicycles, etc. The Pneulight is equipped with a sufficient layer of rubber around...
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 125 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Designed in aluminium, brass and stainless steel, working pressure 12 bar,...
The 1.4 mm nozzle set for SGH1002-14 is ideal for conventional topcoats, clear coats and metallics. Ensures precise spraying and a quality surface even in everyday use.
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a basic nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread. Air...
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a basic nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread. Air...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Lightweight blow gun with hardened polyamide body for long life. It is equipped with an extended nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread....
The 2.2 mm nozzle set for SGHX100 APS is designed for extremely dense coatings such as resins, gelcoats, 2K fillers and protective compounds. It offers high flow, strong...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a basic nozzle that can be easily exchanged for another nozzle with M12 x 1.5 thread. Air...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Nozzle set 0,8 mm for SGH2000 spray gun.
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 0.4 - 1 kg. Aluminium body with lower cable outlet 1600 mm long and...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 19 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.
Reversible valve with handle for inflating wheels and tyres as an accessory for TG tyre inflators with compressed air.
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
Basic accessories for the Profipaint HVLP spray gun. 1.5 mm nozzle set.
Copper slag for blasting in 25kg pack. Use as an abrasive for blasting.
Spring balancer for suspension of pneumatic tools with a load capacity of 0.5 to 1.5 kg and a stroke of one metre.
Miniature rubber tap with 2 mm nozzle. Ideal for blowing sensitive surfaces that must not be damaged by touch. The airflow is triggered by pressing the rubber part. Operating...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 19 mm screws.
Spring balancer for suspension of pneumatic tools with a load capacity of 1.5 to 3.0 kg and a stroke of one metre.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Possibility to set the maximum flow rate and avoid damage. Lever...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.
Extended curved nozzle GN-LG for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Equipped with a rubber...