Pneu and Aku tools with gun technology, Page 6
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Bestsellers
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 3 kg. Aluminium body with lower cable outlet 1600 mm long and...
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 4 - 6 kg. Aluminium body with 2000 mm long lower cable outlet and...
Balancer type 9336 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 4 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 13 mm screws.
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 4 kg. Aluminium body with 2000 mm long lower cable outlet and...
Balancer type 933 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 6 - 8 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...
Balancer type 933 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 8 - 10 kg. Aluminium body with 2500 mm lower cable outlet and rubber...
Balancer type 933 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 4 - 6 kg. Aluminium body with 2,500 mm lower cable outlet and rubber...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Robust all-metal blowgun with forged aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
The M7 Adapter ADA01 is a universal adapter for easy connection of M7 tools to compatible MIL/DEW power supplies. It ensures stable and safe power transmission, is durable,...
The M7 Adapter ADA02 is a universal adapter for easy connection of M7 tools to compatible MAK power supplies. It ensures stable and safe power transmission, is durable,...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 9 mm screws.
Copper slag for blasting in 25kg pack. Use as an abrasive for blasting.
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 39 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 29 mm screws.
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Robust all-metal blow gun with forged aluminium body, extremely resistant to impact and mechanical damage. Traditional design, lever trigger control, body is equipped with eye...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Cast aluminum body. The installed hook allows 360° rotation. Long...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Designed in aluminium, brass and stainless steel, working pressure 12 bar,...
Balancer type 932 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 6 - 8 kg. Aluminium body with 2000 mm long lower cable outlet and...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 22 mm screws.
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Lightweight blow gun with hardened polyamide body for long life. It is equipped with a safety soundproof nozzle that can be easily exchanged for another nozzle with M12 x 1.5...
Spare 750 ml bottom container for SG990S spray guns in aluminium bottom version.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 15 mm screws.
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Cast aluminum body. The installed hook allows 360° rotation. Long...
