Pneu and Aku tools with gun technology, Page 7
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Product sorting
List of products
The 1.7 mm nozzle set for SGHX100 APS is designed for thicker coatings such as fillers, 2K primers and more viscous materials. Provides higher flow rates, uniform spraying and...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
The 1.4 mm nozzle set for SGH501 HVLP is the ideal choice for topcoats, acrylic paints and metallics. It provides high precision, uniform spraying and reliable performance even...
SG990S spray gun with 750 ml bottom container and 1.8 mm nozzle with the possibility of adding additional nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 22 mm screws.
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Hardened square reducer with 35 mm diameter and 48 mm height equipped with ball. Inner square 1/2" with reduction to outer square 3/4".
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
Robust all-metal blowgun with die-cast aluminium body, traditional design, lever control, body is equipped with eye for hanging the gun on the balancer, nozzle thread M12x1,25 -...
The 2.2 mm nozzle set for SGH501 HVLP is designed for thick materials such as resins, gels, sealants or thick coatings. Provides high paint flow, smooth spraying and reliable...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Designed in aluminium, brass and stainless steel, working pressure 12 bar,...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Pressure washer guns for use in crafts, maintenance workshops and DIY. Version with 1 000 ml aluminium bottom container. Body with hook for hanging, lever control. Extended...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 25 mm screws.
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 0.4 - 1 kg. Aluminium body with lower cable outlet 1600 mm long and...
Nozzle set 0,8 mm for SGH2000 spray gun.
The 1.0 mm nozzle set for SGH501 HVLP is designed for fine painting, clear coats, stains and thin coatings. Ensures precise spraying and high spray uniformity even when working...
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of brass and stainless steel, working pressure 12 bar, working...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
The 2.0 mm nozzle set for SGM502 is designed for very dense materials such as 2K fillers, thixotropic coatings or technical primers. It provides high paint flow and is ideal for...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Cast aluminum body. The installed hook allows 360° rotation. Long...
Airbrush miniature spray gun for fine spraying and artistic drawings; adjustable container in different directions for good handling. Practical packaging in a small case with...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 24 mm screws.
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 25 mm screws.
Nozzles for taps, nozzles and accessories. Nozzles can be replaced at the blow-off taps. Robust blow-off taps for permanent use in the most demanding conditions. Designed for...
The M7 Adapter ADA02 is a universal adapter for easy connection of M7 tools to compatible MAK power supplies. It ensures stable and safe power transmission, is durable,...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 2 - 3 kg. Aluminium body with lower cable outlet 1600 mm long and...
Miniature rubber tap with 2 mm nozzle. Ideal for blowing sensitive surfaces that must not be damaged by touch. The airflow is triggered by pressing the rubber part. Operating...
Balancer type 931 for pneumatic tools but also for tools in other fields, adjustable design. Load capacity 1 - 2 kg. Aluminium body with lower cable outlet 1600 mm long and...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
The 2.5 mm nozzle set for SGHX100 APS is designed for extremely viscous materials such as thixotropic materials, sealants, resins and heavy fillers. Ensures maximum paint flow...
Nozzle opening 8 mm for high flow. For applications with high flow requirements, e.g. for blowing castings. Connection to the tap using a 13 mm diameter mandrel for pressure hoses.
Robust blow-off taps for easy holding on the job and for continuous use in the toughest conditions. Made of aluminium, brass and stainless steel, working pressure 12 bar,...
Spring balancer for suspension of pneumatic tools with a load capacity of 1.5 to 3.0 kg and a stroke of one metre.