M7 air-powered pneumatic tools, Page 2
-
Impact wrenches; pneumatic design
-
Ratchet wrenches; pneumatic design
-
Nuts for tighteners; cast iron
-
Shank grinders; pneumatic design
-
Angle grinders; pneumatic design
-
eccentric grinders; pneumatic design
-
Sheet metal cutters; pneumatic design
-
Car body saws; pneumatic design
-
Drills; pneumatic design
-
Screwdrivers; pneumatic design
-
Chopping hammers; pneumatic design
-
Riveting pliers; pneumatic design
-
Staplers and nailers; pneumatic design
-
Pressure lubricators; pneumatic design
-
Balancers; professional design M7
-
Other tools; pneumatic design
Product sorting
List of products
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Set of 5 hexagon chisels 10 mm for pneumatic chisel hammer AH-9150K.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Spring balancer for suspension of pneumatic tools with a load capacity of 0.5 to 1.5 kg and a stroke of one metre.
Compact impact wrench with 1/2" clamping square for tightening and loosening smaller screws up to M16. Extremely short design with a length of only 104 mm suitable for very...
Air saw with 10,000 oscillations per minute, working pressure 6.3 bar and air consumption 143 l/min.
Miniature oiler for direct mounting on 1/4" air tool inlet threads . Placement directly on the tool improves oil dispersion in the compressed air. Possibility of adjusting the...
Polishing sponges with a diameter of 76 mm designed for the M7 QP-123 air driven polisher. The design of the sponge is rough.
Polishing sponges with a diameter of 76 mm designed for the M7 QP-123 air driven polisher. The sponge is medium coarse.
Engraving pen designed especially for marking and marking metal parts such as moulds. Hose with protection against mechanical damage, working pressure 6.3 bar; stainless steel...
Spring balancer for suspension of pneumatic tools with a load capacity of 1.5 to 3.0 kg and a stroke of one metre.
Pistol drill with 10mm quick-release chuck and 6.3 bar working pressure.
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
The extension allows the loosening of very deep and hard-to-reach bolts and nuts. Extension of 75 mm for nuts with 1/2" square clamping. The outer square is equipped with a...
Miniature oilers for direct mounting on 1/4" air tool inlet threads . Placement directly on the tool improves oil dispersion in the compressed air. Possibility of adjusting the...
Tools for simple cutting of window glass from frames, professional use. The rear air outlet reduces noise and diverts airflow away from the work surface. Low vibration and low...
Set of 5 grinding wheels with 3 mm shank. Designed for pneumatic tools and miniature and shank grinders powered by compressed air.
Hardened nuts for high tightening torques. For impact wrenches with 1" clamping square for 33 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Tightening and loosening of bolts, especially during wheel changes on motorcycles and passenger cars. Die-cast aluminium body with rubber grip to prevent vibration and cold when...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 15 mm screws.
Small straight grinder with 6 mm shank with 25,000 idle speed, working pressure 6.3 bar and air consumption 100 l/min.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 15 mm screws.
Practical pneumatic professional stapler and nailer combined into one device for staples with a width of 5.7 mm and a height of 16 to 40 mm and nails with a length of 15 to 50...
A series of professional drills for general drilling work, especially in the craft and maintenance sector. Planetary gearbox with three toothed wheels, one-hand control of...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 27 mm screws.
Pressure lubricator with lubricant dosing with 500 cc container, max. pressure 8,3 bar and 1/4" thread. Precise lubricant dosage of 0.5 g per batch and high lubrication output...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 23 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 26 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 25 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 22 mm screws.
Pistol for extrusion of common cartridges of 50 mm diameter with working pressure 6.3 bar and a consumption of 143 l/min.