M7 air-powered pneumatic tools, Page 3
-
Impact wrenches; pneumatic design
-
Ratchet wrenches; pneumatic design
-
Nuts for tighteners; cast iron
-
Shank grinders; pneumatic design
-
Angle grinders; pneumatic design
-
eccentric grinders; pneumatic design
-
Sheet metal cutters; pneumatic design
-
Car body saws; pneumatic design
-
Drills; pneumatic design
-
Screwdrivers; pneumatic design
-
Chopping hammers; pneumatic design
-
Riveting pliers; pneumatic design
-
Staplers and nailers; pneumatic design
-
Pressure lubricators; pneumatic design
-
Balancers; professional design M7
-
Other tools; pneumatic design
Bestsellers
Small eccentric grinder with 125 mm diameter disc, 9000 idle speed, 6.3 bar working pressure and 142 l/min air consumption.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 17 mm screws.
Tightening and loosening of bolts, especially during wheel changes on motorcycles and passenger cars. Die-cast aluminium body with rubber grip to prevent vibration and cold when...
Quick-release chisel head for the AH-9150K pneumatic chisel hammer.
Air saw with 10,000 oscillations per minute, working pressure 6.3 bar and air consumption 143 l/min.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P54 in the picture.
Polishing wheel with a diameter of 178 mm for the QP-327M gun polisher. Velcro design.
Hardened square reducer with a diameter of 44 mm and a height of 60 mm equipped with a ball. Inner square 3/4" with reduction to outer square 1".
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 24 mm screws.
Miniature oilers for direct mounting on the inlet threads of 3/8" pneumatic tools. Positioning directly on the tool improves dispersion of oil in the compressed air; oil...
Set of 5 hexagon chisels 10 mm for pneumatic chisel hammer AH-9150K.
original lubricant in tube with application attachment; intended for lubrication of internal parts of M7 pneumatic tools.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 26 mm screws.
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 40 mm screws.
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 19 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 22 mm screws.
Airbrush miniature spray gun for fine spraying and artistic drawings; adjustable container in different directions for good handling. Practical packaging in a small case with...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 21 mm screws.
Set of grinding wheels with 6 mm shank. Designed for miniature and foot grinders powered by compressed air from the renowned manufacturer of pneumatic tools M7.
Set of 6 nuts for impact wrenches with 1/2" clamping square. Shortened length of only 28 mm for good handling in small spaces. Dimensions 13-17-19-21-22-24 mm. Hardened design...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 27 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 23 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 25 mm screws.
Spare cutting edge for QG-102 and QG-202 sheet metal shears. Important note: when replacing, always replace all three blades at the same time. This blade is the right part of...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Vibratory sander for sanding wooden and metal surfaces, without suction. For rectangular sandpaper, paper fixing by wire mechanism. Low centre of gravity for uniform grinding;...
Replacement rubber disc. Original replacement disc for the QB-802 sticker remover from M7, a well-known manufacturer of air tools.
Sanding belt set for belt sanders, 1 set contains 10 sanding belts. QB-91208 - 20 x 520 mm roughness *80.
A series of professional drills for general drilling work, especially in the craft and maintenance sector. Double planetary gearbox with three toothed wheels, one-hand direction...
Clamping head for pneumatic chisel hammers M7 SC-221C and SC-222. Can be exchanged for other sockets, extensions and springs.
Small straight grinder with 6 mm shank with 25,000 idle speed, working pressure 6.3 bar and air consumption 100 l/min.
Sanding belt set for belt sanders, 1 set contains 10 sanding belts. QB-91110 - 10 x 330 mm thick. *100.
Sanding belt sets for belt sanders, 1 set contains 10 sanding belts. QB-91210 - 20 x 520 mm roughness *100.
Chisels and scrapers with hexagonal shank 17,2 × 71,5 mm, clamping with chuck. Flat chisel 25 mm for hammers SN-3121/SN-3224.
Replacement window glass cutting attachments for M7 - QK-111 pneumatic tools. 5 types with different shapes - Type P52 in the picture.