M7 air-powered pneumatic tools, Page 4
-
Impact wrenches; pneumatic design
-
Ratchet wrenches; pneumatic design
-
Nuts for tighteners; cast iron
-
Shank grinders; pneumatic design
-
Angle grinders; pneumatic design
-
eccentric grinders; pneumatic design
-
Sheet metal cutters; pneumatic design
-
Car body saws; pneumatic design
-
Drills; pneumatic design
-
Screwdrivers; pneumatic design
-
Chopping hammers; pneumatic design
-
Riveting pliers; pneumatic design
-
Staplers and nailers; pneumatic design
-
Pressure lubricators; pneumatic design
-
Balancers; professional design M7
-
Other tools; pneumatic design
Product sorting
List of products
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Sanding belt set for belt sanders, 1 set contains 10 sanding belts. QB-91108 - 10 x 330 mm roughness *80.
Pneumatic ratchet wrench with 1/2" chuck and 69 Nm loosening torque and 6.3 bar working pressure.
Set of 5 chisels with different profiles with hexagonal shank. Flat chisel, cutting chisel, scraping chisel, separating chisel, pin removal chisel. Chisel length 175 mm.
Pressure lubricators for industrial and professional use; tools for pressure extrusion of lubricants and their application. Corrosion-resistant parts for increased service life;...
Extended hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 40 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 25 mm screws.
The chopping hammer for demanding professional use; cylinder and piston made of high-alloy steel for long service life. Clamping of cutting tools by means of clamping spring;...
Chisels and scrapers with hexagonal shank 17,2 × 71,5 mm, clamping with chuck. Pointed point for hammers SN-3121/SN-3224.
Air saw with 10,000 oscillations per minute, working pressure 6.3 bar and air consumption 143 l/min.
Universal impact wrench with 3/4" clamping square for tightening and loosening smaller screws up to M25. Extremely short design with a length of only 104 mm suitable for very...
Chisels and scrapers with hexagonal shank 17,2 × 71,5 mm, clamping with chuck. Flat chisel 25 mm for hammers SN-3121/SN-3224.
A unique tool for combining the power of a tightener with the practicality of a ratchet. Particularly suitable for loosening screws in extremely tight spaces with high required...
Ratchet wrench with 1/2" square clamp and practical 30° up and down swivel head. Extreme ease of tightening screws in confined spaces. Designed for professional use, areas of...
Ratchet wrench with 1/2" clamping square and hollow head for tightening nuts on threaded rods and long threads. Delivery in set: case, ratchet NE-461 with hollow head, 8 pieces...
Replaces complicated manual work and significantly increases speed when changing brake pads; can be used with both right and left hand. Suitable for all types and makes of...
Heavy-duty professional hammer with extended body; cylinder and piston made of high-alloy steel for long service life. Clamping of cutting tools by means of clamping spring;...
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Steel wire rope for long service life, end with metal carabiner;...
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 26 mm screws.
Small impact wrench NC-3610Q with double hammer impact. The working pressure of this pneumatic tool is 6.3 bar of compressed air. The impact wrench is designed for everyday use,...
Small shank grinder for grinding small parts and small surfaces; straight design with 3 mm shank. Hose with spark arrestor, working pressure 6,3 bar; designed for normal...
Pistol polisher for sanding wooden and metal surfaces in pistol design. For small discs with a diameter of 76 mm, Velcro fastening; adjustable speed; very low noise level of...
A unique tool for combining the power of a tightener with the practicality of a ratchet. Particularly suitable for loosening screws in extremely tight spaces with high required...
Small shank grinder for grinding small parts and small surfaces; straight design with 3 mm shank. Hose with spark arrestor, working pressure 6.3 bar; designed for demanding...
A series of professional drills for general drilling work, especially in the craft and maintenance sector. Planetary gearbox with three toothed wheels, one-hand control of...
Pneumatic staple gun for frequent professional use. Handle with non-slip rubber coating for good grip during work. Designed for narrow staples with a shank width of 4 mm and a...
Practical attachment for use of the M7 SC-221C and SC-222C pneumatic hammers for needle peening.
Miniature oiler for direct mounting on 1/4" air tool inlet threads . Placement directly on the tool improves oil dispersion in the compressed air. Possibility of adjusting the...
Cartridge guns for professional use; tools for pressure extrusion of cartridges with sealants. Smooth sealant delivery thanks to continuous air supply for significantly improved...
Industrial quality body saw for heavy duty cutting of sheet metal, plastics and wood. Improved handle ergonomics and specially designed cylinder for lower vibration. Trigger...
Universal straight screwdriver for self-tapping screws in steel, plastic and wood up to size M4 in professional design. Clamping of attachments by means of a standard 6.35 mm...
Body saw QD-291 in straight design for common professional use. Designed for cutting sheet metal, plastics, wood; quick release system for fast blade change. Trigger with safety...
Special machine for removing vinyl stickers, rust and oxides on car bodies. It allows the removal of the paintwork without any damage to the paintwork without heating the...
Foot grinder in robust industrial design for extremely heavy grinding work. Equipped with a durable steel body and practical front air outlet; areas of application: grinding in...
Extended hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 14 mm screws.
The M7 NC-4255Q Impact Wrench is a powerful tool designed for efficient tightening and loosening of bolts and nuts. It is equipped with a 1/2" clamping square and achieves a...
Robust impact wrench with 1" clamping square for tightening and loosening screws up to M33. Equipped with roller hammer impact driver with max. torque of 2 441 Nm. Extended...
Set of 2 saw blades with 24 teeth/inch as an accessory for the body straight saw.
A series of professional eccentric grinders for grinding metal surfaces, wood, leather products, etc.. Model for discs with diameters of 152 mm; attachment of discs by Velcro....
A series of industrial quality eccentric grinders for the most demanding grinding applications. Equipped with long-life gearbox, adjustable speed for even grinding. Model for...