Pneumatics & Hydraulics, Page 10
Socket couplings designed for quick and easy assembly of plastic tubing in the field of automation, measuring and control technology. The all-metal design is particularly...
The blue plastic spiral hose 8/5 mm made of polyurethane in length of 15 m, including fitted end caps, is characterised by high resistance to breakage, abrasion and pressure....
The blue plastic spiral hose 10/6.5 mm made of polyurethane in a length of 7.5 m is characterized by high resistance to breakage, abrasion and pressure. The small diameter of...
The blue plastic spiral hose 6/4 mm polyurethane, 5 m long, is characterised by high resistance to breakage, abrasion and pressure. The small diameter of the spiral saves space....
Full flow ball valves, lever operated in blue. Connection via internal and external 3/4" thread. Body, threaded part and ball made of MS 58 brass, PTFE sealing ring, Viton...
Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 10 bar. Designed for pressure measurements of non-aggressive...
Plastic manometer with 50 mm diameter gauge with rear connection via G1/4" thread for pressure measurement from 0 to 40 bar. Designed for pressure measurements of non-aggressive...
Plastic manometer with 63 mm diameter gauge with rear connection via M12*1.5 metric thread for pressure measurement from 0 to 16 bar. Designed for pressure measurements of...
Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure measurement with a range of 0 to 6 bar. Designed for pressure measurements of...
Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for measuring vacuum with a range of -1 to 0 bar. Designed for pressure measurements of...
Plastic manometer with 50 mm diameter gauge with side connection via G1/4" thread for pressure measurement from 0 to 60 bar. Designed for pressure measurements of non-aggressive...
glycerine manometer with a range of 0/100 bar. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure...
glycerine manometer with 0/60 bar range. Pointer diameter 63 mm with 1/4" side connection. Glycerine filling makes it easier to read the measured pressure for pressure surges....
glycerine manometer with a range of 0/10 bar. Pointer diameter 63 mm with 1/4" rear connection. Glycerine filling makes it easier to read the measured pressure for pressure...
Spout ball valves Ball valves with hose connection Control by lever in red in the range of 90° Body - threaded part and ball made of brass MS58, sealing ring - PTFE, o-ring -...
Cast iron plug fitting with male thread R 3/8" up to 25 bar. Made of tempered hot-dip galvanized cast iron. Designed primarily for water and compressed air piping according to...
Plastic manometer with 63 mm diameter gauge with side connection via G1/4" thread for pressure and vacuum measurement with a range of -1 to 15 bar. Designed for pressure...
Straight socket coupling for quick and easy assembly of plastic tubing with 14 mm outer diameter. Particularly suitable for automation, measuring and control technology and...
The straight coupling with external tapered thread R 1/8", length 21 mm is designed for quick and easy assembly of plastic tubing in the field of automation, measuring and...
EGW deformation hose coupling with a range of 26.5-30.0 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
DW hose clamps with perforated band in material finish W1 with band width 12,7 mm and range 50-70 mm. House and tightening screw and hexagon SW 6 mm. Made entirely of galvanized...
Hose endless belt with a width of 8 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...
Hose clamps with perforated belt in material finish W4 with a belt width of 12.7 mm in the range 25/40 mm. According to SAE standard with house and tightening screw and hexagon...
SW4 50mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Silencer with external thread - bronze version G1". Utilize venting of valve openings and switchgear. Applications in automation, measurement and control technology
Sliding hand valve with female thread with G3/8" outlet. Manual slide valves are designed for closing and venting pneumatic systems. Application especially in automation...
Quick vent valve G1/2" designed to increase the speed of pneumatic actuators by direct venting from the cylinder chamber. Application especially in automation measuring and...
Shrinking valve with female thread, G1/4" on both sides. Throttle valves are designed to control the speed of pneumatic actuators. They are mainly used in automation measuring...
Holendr with internal and external threaded seals for 1/2" cone. Designed for operations with high demands on durability, longevity and hygiene. Recommended applications in the...
Mufna with female pipe thread G1/2" - G3/4". Designed for operations with high demands on durability, longevity and hygiene. Recommended applications in the chemical,...
Mufna with female pipe thread G1/2" - G1/2". Designed for operations with high demands on durability, longevity and hygiene. Recommended applications in the chemical,...
Coupling with external tapered thread 21 - R1/2". According to the DIN 2982 specification. Designed for operations with high demands on durability, longevity and hygiene....
Reducer with pipe thread G3/8" - G1/2". Made of stainless steel 1.4571. Designed for operations with high demands on durability, longevity and hygiene. Recommended applications...
Reducer with pipe thread G1/4" - G1/2". Made of stainless steel 1.4571. Designed for operations with high demands on durability, longevity and hygiene. Recommended applications...
Reducer with pipe thread G1/8"-G1/4". Made of stainless steel 1.4571. Designed for operations with high demands on durability, longevity and hygiene. Recommended applications...
T-piece with internal threads and tap with external thread G1/4" - R1/4". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads....
T-piece with internal threads and tap with external thread G1/8" - R1/8". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads....
Page 10 of 91 - 3613 items total