.png)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
_(1).jpg)
.png)
.jpeg)
.png)
Accessories for manometers, Page 2
-
Pressure indicators SI signal devices
-
Manometer covers rubber blue
-
Condensing loops twisted and curved versions
-
Taps and valves for pressure gauges shut-off and test versions
-
Accessories connection
-
Rings sealing
best-selling products
Nut in stainless steel 1.4571 with thread G 1/2".
Nut in steel with M12 × 1.5 thread.
Nut in stainless steel 1.4571 with thread M20 × 1.5.
The connection is equipped with two internal threads G 1/2" and M20 × 1.5 left.
The connection is equipped with two internal threads G 1/4" and G 1/4" left.
The connection is equipped with two internal threads M12 × 1.5 and M12 × 1.5 left.
The connection is equipped with two internal threads M20 × 1.5 and G 1/2" left.
Design in blue color. Simple signal device for optical indication of the presence of pressure in the blue signal.
Version in green. Simple signal device for optical indication of the presence of pressure in the green signal.
Version in red. Simple signal device for optical indication of the presence of pressure in the red signal.
Design in yellow color. Simple signal device for optical indication of the presence of pressure in the yellow signal.
The working pressure is 6 bar. The connection is M12 × 1.5. The body of the tap is made of brass.
The working pressure is 25 bar. Connection is M20 × 1.5. The tap body is made of stainless steel 1.4571.
The working pressure is 250 bar. Connection is G 1/2". The valve body is made of brass.
The working pressure is 250 bar. Connection is M20 × 1.5. The valve body is made of brass.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of stainless steel 1.4571.
The working pressure is 400 bar. Connection is G 1/2". The valve body is made of steel.
The working pressure is 400 bar. Connection is M20 × 1.5. The valve body is made of steel.
The working pressure is 630 bar. Connection is M20 × 1.5. The valve body is made of stainless steel 1.4571.
The working pressure is 25 bar. Connection is G 1/2". The tap body is made of stainless steel 1.4571.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the attachment is steel.
The attachment has an M12 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The attachment has an M20 × 1.5 thread on the outside, left-hand side, and a thread on the other side. The material of the extension is stainless steel 1.4571.
The nipple has a pin for an M12 × 1.5 nut on one side and a sleeve on the other. The nipple material is steel.
.svg?676e60b7)
