Accessories for AKU tools M7, Page 3
Bestsellers
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 28 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 33 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 34 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 36 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 37 mm screws.
Hardened nuts for high tightening torques. For impact wrenches with 3/4" clamping square for 40 mm screws.
Set of 6 nuts for impact wrenches with 1/2" clamping square. Shortened length of only 28 mm for good handling in small spaces. Dimensions 13-17-19-21-22-24 mm. Hardened design...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 16 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 20 mm screws.
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
Hardened square reducer with a diameter of 44 mm and a height of 60 mm equipped with a ball. Inner square 3/4" with reduction to outer square 1".
Hardened square reducer with 46 mm diameter and 68 mm height equipped with ball. Inner square 3/4" with reduction to outer square 1".
Set of 11 nuts for impact wrenches with 1/2" clamping square. Standard height 38 - 42 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 32 mm in 1...
Set of 14 nuts for impact wrenches with 1/2" clamping square. Standard height 38 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened...
Set of 10 nuts for impact wrenches with 1/2" clamping square. Extended design for good handling in deep spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened steel...
Set of 15 nuts for impact wrenches with 1/2" clamping square. Reduced height of only 28 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 24 mm in 1...
