AC profiles and accessories, Page 2

Angle bracket for creating partitions with a 45° angle in structures made of AC 40-8 and IM 40-8 series profiles with a 40x80 section.

Jig for precise drilling of holes in aluminium profiles with AC 30-6 groove.

Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.

Tripod for profiles with a 45x45 section and with the possibility of attaching 3 bases with M16 thread.

Aluminium profile with a modular section dimension of 45x60 and 4 grooves in the shape of AC 45-8. Lightweight version weighing 2.04 kg/m.

Floor angle bracket for mounting on 40 mm wide profiles using M8 screws in a robust design.

Telescopic aluminium profile designed for applications involving profile extensions with a modular section dimension of 50x95.

Panel fixing block with nut for mounting into the groove of AC 45-8 and IM 40-8 series profiles.

Groove connector for direct connection of AC 40-8 and AC 45-8 series profiles.

Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.

Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.

Connecting latch for AC 30-6 series profiles, with M5x20 screw.

Aluminium end cap for 60x60 channel profile.

Polyamide handle with dimensions of 113x35 mm, black colour.

Polyamide handle with dimensions 113x35 mm, blue colour.

Polyamide handle with dimensions 113x35 mm, orange colour.

Sliding pin for folding doors.

Fixture for precise drilling of holes into aluminium profiles with AC 45-8 groove.

Jig for precise drilling of holes into aluminium profiles with AC 40-8 groove.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Aluminium profile with a modular cross-sectional dimension of 22.5x22.5 and 2 grooves of AC 30-6 shape.

Cover strip for closing the 60x60 channel profile.

Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws.

AC 45-8 groove profile for mounting an 8 mm thick panel.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Softened PVC base for installation into AC 45-8 series grooved profiles.

Plastic cap for the base of a 45x45 profile.

Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.

Handle made of black polyamide, dimensions 108x38 mm.

Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.

Rubber base pad insert with a diameter of 100 mm.

Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.

Corner support for creating partitions with a width of 20 mm between the corners of structures made of AC 45-8 series profiles.

Aluminium profile with a modular section dimension of 40x40 and with 2 adjacent AC 40-8 shaped grooves.

Softened PVC base resistant to UV radiation, designed for installation into AC 45-8 series grooved profiles.

Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.

Cover strip for closing the 45x45 channel profile.

Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.

Connector for creating perpendicular joints of round profiles of the AC 30-6 series with a 30x30 cut in 2 axes.

Angled solid handle made of grey polyamide, measuring 128x43 mm.