IM profiles and accessories, Page 2
Bestsellers
List of products
Coupling for creating a pivoting joint between AC 40-8 series profiles with a 40x40 section.
Handle made of black polyamide, dimensions 146x44 mm.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Cover strip for closing channel profile 80x80.
Magnetic stop for detachable door installation.
Panel fixing block for thicknesses of 1 to 8 mm.
Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.
Flat aluminium end cap for closing the groove of AC 45-8 and IM 40-8 series profiles.
Aluminium end cap for channel profile 45x45.
Plastic hinge made of polyamide with dimensions 50x50, for profiles 30/30.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
M18x0.75 threaded magnet for removable door installation.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.
Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, grey colour.
Drill bit for aluminium with a diameter of D=5.5 mm.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
Aluminium hinge with dimensions 81x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Door stop for removable door installation, made of brass.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
The 60x60 aluminium profile allows for the creation of channels with cables.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Aluminium hinge with dimensions 81x64, for 40/40 profiles.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Polyamide rotary latch for closing doors.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Aluminium end cap for 80x80 duct profile.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Flange for attaching bases and castors to AC 30-6 and IM 30-6 series profiles with a 30x60 section, equipped with an M12 thread.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.