Průmyslové vzduchové filtry ISO 8573 pro tlak 20 až 2000 mbar
Hledáte špičkové průmyslové vzduchové filtry pro tlaky od 20 do 2000 mbar? Přinášíme široké spektrum řešení, jak v kompresorové soustavě zlepšit kvalitu stlačeného vzduchu a ochránit tak všechny její komponenty před kondenzátem, olejovými výpary a mechanickými nečistotami. Průmyslové vzduchové filtry vyhovující normě ISO 8573 od výrobců Omega Air, B-Air, NGF a Mark patří mezi ty nejlepší a nejdůležitější nástroje pro úpravu stlačeného vzduchu.
A pokud si s výběrem správného vzduchové filtru nevíte rady, mrkněte se do naší poradny na článek: Jak filtrovat stlačený vzduch
-
Omega air filters; 16 to 64 bar
-
High pressure filters CHP/IHP; carbon and stainless steel up to 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
List of products
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Hankison filter cartridge for SF series air filter type F03. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
AAFC 2" cyclone separator with a flow rate of 16,667 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
AAFC 2" cyclone separator with a flow rate of 25,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F02 with 1/4" female thread connection. The filter is equipped with a clogging indicator and an...
The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-25 and AAFM-30 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
The filters are used to remove the largest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Body with easily removable container and...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-25 and AAFR-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and an...
Replacement cyclone cartridge for liquid water filtration AAFC-198V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-25 and AAFS-30 microfilters. Recommended replacement 12 months or every 4,000 MH and...
Replacement cyclone cartridge for liquid water filtration AAFC-60V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and an automatic...
AAFM pre-filter in 3/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFB coarse filter in 3/4" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
The simplest way to drain condensate from pressure vessels and filter vessels. Connection by thread, control of the firing by a rotary pin.
AAFP basic filter in 1/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-35 and AAFM-60 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
AAFM pre-filter in 3/8" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Hankison filter cartridge for HF series air filter type F03. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-35 and AAFP-60 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
Dust filter AAFR in 3/4" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFA activated carbon filter in 1/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement cyclone cartridge for liquid water filtration AAFC-2160V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...