Interchangeable nozzles for air blowing M12x1,25

Basic nozzle for blow guns
		basic nozzle with centrally located 1.5 mm diameter hole concentrated air stream with high force noise level up to 90 dB (A) at pressures up to 4 bar
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-B	M12x1.25	10	1,5	120 l/min

Soundproof nozzle for blow guns
		the nozzle is equipped with an internal sintered bronze insert that separates the air flow and slows it down, thus reducing noise noise level only up to 70 dB (A) and very low blowing force
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-S	M12x1.25	10	-	280 l/min

Polyamide injector nozzle for blow guns
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun lightweight polyamide design
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IP	M12x1.25	10	2,0	370 l/min

Aluminium injector nozzle for blow guns
		nozzle with extreme performance by sucking and pulling air from the surrounding atmosphere into the air stream from the gun aluminium design for higher mechanical resistance
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-IA	M12x1.25	10	2,5	320 l/min

Nozzle with air shield for blow guns
		nozzle equipped with a side drilling that splits the beam and creates a partly protective air shield preventing small debris from flying towards the operator the formation of the shield is reflected in a slight reduction in nozzle power and an increase in air consumption
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-T	M12x1.25	10	-	340 l/min

Soundproof safety nozzle for blow guns
		combination of safety nozzle function with soundproof function the nozzle forms a protective shield, preventing dirt from flying towards the operator Noise reduction to 74 dB (A), several international certificates (OSHA,BIA,BG) conical air routing inside the nozzle increases the blowing power up to 2.5 times
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-SF	M12x1.25	10	-	300 l/min

Extended nozzle for blow guns
		extended and curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-L	M12x1.25	10	2,3	255 l/min

Extended nozzle with rubber protection for blow guns
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm fitted with a rubber protective attachment at the nozzle end to protect the blown surface from mechanical damage
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LG	M12x1.25	10	2,3	255 l/min

Extended safety nozzle with soundproofing for blow guns
		extended curved nozzle for improved handling and reach during blowing made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm combination of safety nozzle function with soundproof function the nozzle creates a protective shield with a star-shaped profile to prevent dirt from flying off noise reduction to 80 dB (A) several international certificates of safe operation - OSHA, BIA, BG, 98/37EG
Ordering number	Thread	Maximum pressure bar	Diameter mm	Flow rate at 6 bar - l/min
GN-LSF	M12x1.25	10	2,3	240 l/min

Straight long nozzles for blow guns
		long nozzles with straight profiles for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
LNG-115	M12x1.25	115	10	3,0	nickel plated brass	360 l/min
GNL-165	M12x1.25	165	10	3,0	nickel plated brass	360 l/min
GNL-265	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNL-415	M12x1.25	415	10	3,0	nickel plated brass	360 l/min
GNL-800	M12x1.25	800	10	2,3	nickel plated steel	255 l/min

Curved long nozzles for blow guns
		long nozzles with curved end for improved handling and reach during blowing different lengths for different customer needs
Ordering number	Thread	Length mm	Maximum pressure bar	Diameter mm	Material nozzles	Flow rate at 6 bar - l/min
GNLB-110	M12x1.25	110	10	3,0	nickel plated brass	360 l/min
GNLB-160	M12x1.25	160	10	3,0	nickel plated brass	360 l/min
GNLB-260	M12x1.25	265	10	3,0	nickel plated brass	360 l/min
GNLB-800	M12x1.25	800	10	3,4	nickel plated steel	450 l/min

Bicycle valve for blow guns
		by mounting the valve on the bicycle, the blow gun can also be used for tyre inflation
Ordering number	Thread	Maximum pressure bar	Material nozzles
GN-TI	M12x1.25	10	brass

Protective shield for blow guns
	the protective shield is designed to be mounted between the nozzle and the body of the blow gun protects the hand during handling from flying dirt
Ordering number	Diameter mm	Material nozzles
GN-PS	70	jacket

Adjustable air-saving nozzle for blow guns
		designed for optimal flow settings and specific user applications simultaneous reduction of air consumption costs and noise reduction can be connected to all guns with internal thread M12x1,25 body made of aluminium, other parts made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Diameter mm	Weight g
GN-R	M12x1.25	10	57	2,3	22

Flat nozzles with 6 channels for blow guns
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 6 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF6-M12	M12x1.25	6	82	27
GNF6-G14	G 1/4"	6	67	27

Flat nozzles with 16 channels for blow guns
		flat nozzles for process blowing in industrial applications (e.g. cooling) airflow distribution into 16 channels, flat shape of the blowing airflow adapter made of aluminium, nozzle made of POM
Ordering number	Thread	Maximum pressure bar	Length mm	Width mm
GNF16-M12	M12x1.25	6	103	47
GNF16-G14	G 1/4"	6	90	47

Bestsellers

€2,40 –10 %

Basic nozzle

()

Code: GN-B

Was: €2,40 (–10 %)

€2,16

(€1,79 excl. VAT)

105 103 rovne dlouhe trysky ofuk kompresor

€10,11 –4 %

Straight long nozzles 265 - M12x1.25

()

Code: GNL-265

Was: €10,11 (–4 %)

€9,61

(€7,94 excl. VAT)

470 43 prodlouzena tryska ofuk kompresor bezpecnostni odhlucenena

€15,99 –5 %

Extended nozzle with noise reduction and safety M12x1.25

()

Code: GN-LSF

Was: €15,99 (–5 %)

€15,19

(€12,55 excl. VAT)

tryska plocha 16 kanalu vzdduch tlak ofuk pistole 3

€35,60 –5 %

Flat nozzles with 16 channels M12x1.25

()

Code: GNF16-M12

Was: €35,60 (–5 %)

€33,82

(€27,95 excl. VAT)

269 27 tryska se stitem kompresor m12x1,25

€7,54 –4 %

Nozzle with air shield M12x1.25

()

Code: GN-T

Was: €7,54 (–4 %)

€7,17

(€5,93 excl. VAT)

470 39 odhlucena bezpecnostni tryska kompresor ofuk

€24,78 –5 %

Soundproof safety nozzle M12x1.25

()

Code: GN-SF

Was: €24,78 (–5 %)

€23,54

(€19,45 excl. VAT)

269 59 injektorova tryska ofuk kompresor kopie

€13,89 –4 %

Injector nozzle made of aluminum M12x1.25

()

Code: GN-IA

Was: €13,89 (–4 %)

€13,20

(€10,91 excl. VAT)

€35,60 –5 %

Flat nozzles with 16 channels G1/4"

()

Code: GNF16-G14

Was: €35,60 (–5 %)

€33,82

(€27,95 excl. VAT)

105 16a zahnute dlouhe trysky ofuk kompresor

€38,55 –5 %

Bent long nozzles 800 - M12x1.25

()

Code: GNLB-800

Was: €38,55 (–5 %)

€36,62

(€30,26 excl. VAT)

470 12 prodlouzena tryska ofuk kompresor

€11,25 –9 %

Extended nozzle M12x1.25

()

Code: GN-L

Was: €11,25 (–9 %)

€10,13

(€8,37 excl. VAT)

Show more products

25 items total

Original parts

€2,40 –10 %

Basic nozzle

()

€1,79 excl. VAT

€2,16 / pcs

Basic nozzle GN-B with centrally located 1.5 mm diameter hole. Concentrated air flow with high force. Noise level up to 90 dB (A) at pressures up to 4 bar.

Code: GN-B

269 45 injektorova tryska ofuk kompresor kopie

Original parts

€7,24 –4 %

Injector nozzle made of polyamide M12x1.25

()

€5,69 excl. VAT

€6,88 / pcs

GN-IP polyamide injector nozzle with extreme performance by drawing and drawing air from the ambient atmosphere into the air stream from the gun. Lightweight polyamide design.

Code: GN-IP

Original parts

€10,11 –4 %

Straight long nozzles 265 - M12x1.25

()

€7,94 excl. VAT

€9,61 / pcs

Straight long nozzles GNL-265 with straight profile for improved handling and reach during blowing. Nozzle length 265 mm.

Code: GNL-265

Original parts

€13,93 –10 %

Silenced nozzle M12x1.25

()

€10,36 excl. VAT

€12,53 / pcs

The GN-S soundproof nozzle is equipped with a sintered bronze inner liner that separates the airflow and slows it down, thus reducing noise. Noise level only up to 70 dB (A) and...

Code: GN-S

269 15 ochranny stit vzduch kompresor postole ofuk

Original parts

€7,29 –5 %

Protective shield for pistols

()

€5,72 excl. VAT

€6,92 / pcs

The GN-PS shield is designed for mounting between the nozzle and the body of the blow gun. It protects the hand from flying dirt during handling.

Code: GN-PS

Original parts

€9,23 –4 %

Straight long nozzles 115 - M12x1.25

()

€7,25 excl. VAT

€8,77 / pcs

GNL-115 straight long nozzles with straight profile for improved handling and reach during blowing. Nozzle length 115 mm.

Code: GNL-115

Original parts

€9,23 –4 %

Bent long nozzles 110 - M12x1.25

()

€7,25 excl. VAT

€8,77 / pcs

Curved long GNLB-110 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 110 mm.

Code: GNLB-110

Original parts

€11,25 –9 %

Extended nozzle M12x1.25

()

€8,37 excl. VAT

€10,13 / pcs

Extended and curved GN-L nozzle for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3, bore 110 mm.

Code: GN-L

Original parts

€9,53 –5 %

Straight long nozzles 165 - M12x1.25

()

€7,48 excl. VAT

€9,05 / pcs

GNL-165 straight long nozzles with a straight profile for improved handling and reach during blowing. Nozzle length 165 mm.

Code: GNL-165

Original parts

€10,11 –4 %

Bent long nozzles 260 - M12x1.25

()

€7,94 excl. VAT

€9,61 / pcs

Curved long GNLB-260 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 260 mm.

Code: GNLB-260

Original parts

€9,53 –5 %

Curved long nozzles 160 - M12x1.25

()

€7,48 excl. VAT

€9,05 / pcs

Curved long GNLB-160 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 160 mm.

Code: GNLB-160

Original parts

€7,54 –4 %

Nozzle with air shield M12x1.25

()

€5,93 excl. VAT

€7,17 / pcs

GN-T air shield nozzle equipped with a night drilling system that splits the beam and creates a partially protective air shield to prevent small debris from flying towards the...

Code: GN-T

Original parts

€35,60 –5 %

Flat nozzles with 16 channels M12x1.25

()

€27,95 excl. VAT

€33,82 / pcs

Flat nozzles with 16 channels GNF16-M12 for process blowing in industrial applications (e.g. cooling). Airflow distribution into 16 channels, flat shape of the blowing airflow....

Code: GNF16-M12

Original parts

€15,99 –5 %

Extended nozzle with noise reduction and safety M12x1.25

()

€12,55 excl. VAT

€15,19 / pcs

Extended curved nozzle GN-LSF for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Combination of safety nozzle...

Code: GN-LSF

Original parts

€13,89 –4 %

Injector nozzle made of aluminum M12x1.25

()

€10,91 excl. VAT

€13,20 / pcs

GN-IA aluminium injector nozzle with extreme performance by drawing and drawing air from the ambient atmosphere into the air stream of the gun. Aluminium design for higher...

Code: GN-IA

Original parts

€24,78 –5 %

Soundproof safety nozzle M12x1.25

()

€19,45 excl. VAT

€23,54 / pcs

Soundproof safety nozzle GN-SF combines the safety nozzle function with the soundproof function. The nozzle forms a protective shield, preventing dirt from flying towards the...

Code: GN-SF

470 84 regulovana tryska pro usporu vzduchu kompresor

Original parts

€25,43 –4 %

Regulated air saving nozzle M12x1.25

()

€19,97 excl. VAT

€24,16 / pcs

GN-R regulated air-saving nozzle designed for optimum flow adjustment for specific user applications. Simultaneous reduction of air consumption costs and noise reduction. Can be...

Code: GN-R

Original parts

€35,60 –5 %

Flat nozzles with 16 channels G1/4"

()

€27,95 excl. VAT

€33,82 / pcs

Flat nozzles with 16 channels GNF16-G14 for process blowing in industrial applications (e.g. cooling). Airflow distribution into 16 channels, flat shape of the blowing airflow....

Code: GNF16-G14

470 72 prodlouzena tryska ofuk kompresor

Original parts

€11,70 –5 %

Extended nozzle with rubber protection M12x1.25

()

€9,18 excl. VAT

€11,11 / pcs

Extended curved nozzle GN-LG for improved handling and reach during blowing. Made of nickel-plated steel, nozzle diameter 2,3 mm, length 110 mm. Equipped with a rubber...

Code: GN-LG

tryska plocha 6 kanalu vzdduch tlak ofuk pistole 1.png

Original parts

€27,61 –5 %

Flat nozzles with 6 channels M12x1.25

()

€21,68 excl. VAT

€26,23 / pcs

Flat nozzles with 6 channels GNF6-M12 for process blowing in industrial applications (e.g. cooling). Airflow split into 6 channels, flat shape of the blowing airflow. Adapter...

Code: GNF6-M12

Original parts

€26,88 –4 %

Flat nozzles with 6 channels G1/4"

()

€21,11 excl. VAT

€25,54 / pcs

Flat nozzles with 6 channels GNF6-G14 for process blowing in industrial applications (e.g. cooling). Airflow split into 6 channels, flat shape of the blowing airflow. Adapter...

Code: GNF6-G14

Original parts

€38,55 –5 %

Bent long nozzles 800 - M12x1.25

()

€30,26 excl. VAT

€36,62 / pcs

Curved long GNLB-800 nozzles with straight profiles for improved handling and reach during blowing. Nozzle length 800 mm.

Code: GNLB-800

Original parts

€22,16 –4 %

Straight long nozzles 415 - M12x1.25