BH profiles and accessories, Page 4
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Floor bracket for mounting on profiles with a width of 30 mm.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Gas spring with 110 mm stroke and 300 N force.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Multi-purpose profile for defining 2 profiles with a BH 30-8 series groove.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
The 60x60 aluminium profile allows for the creation of channels with cables.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Square nut M6 for BH 30-8 and IM 40-8 slots, equipped with guide and perpendicularly positioned spring.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Magnetic stop for detachable door installation.
Swivel castor with a 100 mm diameter for mounting using a 60x60 flange.
Multi-purpose profile with a height of 23.5 mm for profiles with a groove series BH 30-8 and IM 40-8.
Door stop 30x14 with hole for magnet D=18 mm, made of grey polyamide.
Tubular handle with a length of 200 mm, made from a combination of rubberised aluminium tubing with a diameter of 15 mm and polyamide connecting parts in black.
M18x0.75 threaded magnet for removable door installation.
Fixed castor with a diameter of 60 mm for mounting using a 60x60 flange.
Gas spring with a stroke of 200 mm and a force of 350 N.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Flange for attaching bases and castors to BH 30-8 series profiles with a 30x60 section, equipped with an M12 thread.
Door stop for removable door installation, made of brass.
Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.
Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.
Handle made of black polyamide with dimensions of 129x44 mm.
A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.
Handle made of black polyamide, dimensions 146x44 mm.