AC 45-8, Page 7
Product sorting
List of products
Connector for creating perpendicular joints of round profiles of the AC 45-8 series with a 45x45 cut in 2 axes with the possibility of axial deviation of 45°.
Flange for attaching bases and castors to AC 45-8 series profiles with a 90x90 section and M16 thread.
Door stop with dimensions 56x30 equipped with a magnet.
Universal angle bracket with a 90° angle and dimensions of 86x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Base with a diameter of 50 mm and an M8 connection thread. Base load capacity of 900 kg.
Part to prevent rotation of the perpendicular connection of profiles AC 40-8, AC 45-8.
Flange for blanking off the end of a 45x90 profile connected to a compressed air source.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Panel fixing block with nut for mounting into the groove of AC 45-8 and IM 40-8 series profiles.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 200 N force.
Aluminium profile with a modular section dimension of 30x30 with a special groove for installing panels or wire mesh.
Flange for round profiles AC 45-8 with 45x90 cut for mounting wheels with 60x60 flange.
Flange for round profiles AC 45-8 with 45x90 cut for mounting bases using M16 thread.
Plastic hinge made of polyamide with dimensions 40x40, for profiles 32/32.
Corner flange for mounting M16 threaded pedestals and 60x60 flanged castors, for round profile series AC 45-8, with 45x45 cut.
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Plastic cap for rounded 90x90 profiles in black.
Black plastic end cap for closing the groove of AC 45-8 series profiles.
Grey plastic end cap for closing the groove of AC 45-8 series profiles.
Plastic end cap for 18.5x45 profiles with 3 grooves in black
Gas spring with 110 mm stroke and 50 N force.
Sliding pad for sliding doors made of AC 45-8 profile with a cutting edge of 18.5 mm.
Round base with a diameter of 120 mm for mounting on 32x45 section profiles.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Semi-circular aluminium profile for creating hinged doors from plastic panels up to 15 mm thick.
Two-part base for mounting on profiles with sections 90x90 and 90x180.
Swivel castor with a diameter of 125 mm for mounting with an M16 thread, equipped with a brake.
Corner support for creating partitions with a width of 20 mm between the corners of structures made of AC 45-8 series profiles.
LED light for grooves of AC 40-8 and AC 45-8 profiles with red colour and a length of 250 mm.
Corner connector for connecting 3 profiles of the AC 45-8 series with a 45x45 semi-circular cut at a 90° angle.
PVC seal for profile groove to attach 4 mm thick panels into 8 mm wide grooves.
Aluminium profile with a modular section dimension of 32x45. One side without a groove, the other sides with 3 grooves of AC 45-8 shape.
Corner connector for connecting 3 profiles of the AC 45-8 series with a 32x32 semi-circular cut at a 90° angle.
LED light for AC 40-8 and AC 45-8 profile grooves with green colour and 250 mm length.
Square base for mounting on profiles with a 90x90 section.