Special offer, Page 27
Product sorting
List of products
Temperature-resistant and food-safe silicone tubing 8/4 mm in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 70-90 mm. Manufactured according to DIN 3016. With house and tightening...
PMW 18mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.
Accessories for SG990 spray gun. Replacement nozzle set includes nut, nozzle and needle in 1.5 mm nozzle version.
Hose for non-pressure transport of petrol, oils, cooling emulsions, water and air in diameter 8/5 mm. Operating temperature -10/+60 °C, non-pressure design. The hose complies...
FoxiBase PUR SL-SE suction hose with a diameter of 250 mm made of 0.55 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Hose barb fitting with hose barb with external pipe thread G3/8" - 9 mm. Version in brass with nickel-plated finish. Applications for fluid power, automation, measurement and...
Hose made of PU Elastollan C-98 red, 4/2,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...
Brass reducer from internal thread G1/2" to external thread G1/4". Made of pure brass MS 58, designed for the production of fittings. Designed for compressed air technology, but...
Straight coupling with 4 mm and 6 mm hose shank in brass suitable for mounting PU and PA plastic hoses.
ABAC pressure regulator as an accessory for ABAC piston compressors. The rack is suitable for mounting directly on the airbox of ABAC piston compressors in 3/8" version. This is...
Replacement diaphragm for A2 - A2MR-12 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Suction hose with a diameter of 40 mm made of transparent soft PVC, reinforced with white hardened PVC spiral. The hose is designed for extraction in air handling systems and...
For hose type PU 6.5 × 10 with a length of 12 m. The construction of the drum is made of high quality, impact resistant polypropylene. Equipped with automatic hose reel. Total...
Airbrush in practical set with vinyl hose, containers, tightening wrench, dropper and feeding adapter. Adjustable coating width from 6 to 40 mm. Air inlet 1/4" with special...
Nozzle set with 1.4 mm nozzle for SGH827 low pressure spray guns with HVLP system. For high efficiency of paint transfer and time-saving work. Design with 600 ml nylon upper...
Reducer with NPT 1/4" male thread to G 1/4" female pipe thread. Made of pure brass MS 58, designed for the production of fittings up to a maximum pressure of 10 bar. Designed...
Box with condensate discharge from compressed air piping. Easy connection of hoses, tyre tools and other accessories. G1/2" inlet and 2 x G1/2" outlet. Working pressure up to 15...
Socket couplings with reduced dimensions and weight, for quick and easy assembly of plastic tubing Designed especially for automation, measuring and control technology and...
Plastic pipe clamp 40 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20 °C to 70 °C,...
PLE water and compressed air hoses with a diameter of 34/25 mm. Black tube and casing - oil and abrasion resistant with 1 textile braid.
American model of nipple with G3/8" NPT female thread, one-sided closable. Special mandrel contour for better hose seating and easier installation. Designed for compressed air...
Base for boxes 13 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature -20 °C to 70 °C,...
Nipple for quick couplings with female thread G Universal quick couplings in pure or nickel-plated brass MS 58 New mandrel contour for better hose fitting and easier assembly...
Quick coupling with female thread G3/8". High flow at low pressure gradient due to improved valve design. Designed for compressed air in industry and crafts, especially when...
Practical pneumatic professional stapler and nailer combined into one device for staples with a width of 5.7 mm and a height of 16 to 40 mm and nails with a length of 15 to 50...
Vacuum hose with inner diameter 80 mm and working temperature -5/+60°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 32-50 mm. Manufactured according to DIN 3016. With house and tightening...
Socket couplings with reduced dimensions and weight, for quick and easy assembly of plastic tubing Designed especially for automation, measuring and control technology and...
Hose barb fitting for hose with external thread 9 - G1/2". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for...
Fitting with external threads G3/8" - G1/2". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed air...
Blue hose with 15/12 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...
Black SBR inner tube, blue SBR/NR sheath, textile braid 13,3/6,3 mm. Welding hoses designed for oxygen transport during flame welding and cutting and for arc welding under...
Pipe thread reducer A003 with female thread G 3/8". External thread G 1/8". Version in brass with nickel-plated finish. Applications for fluid power, automation, measurement and...
Straight fitting with cutting ring in 1/2" male thread for 15/12 mm hose. Universal fittings for use in various areas, dimensions and design meet the requirements of DIN...
Reduction internal/external thread G1/2" - G1". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed...
Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 2.