Special offer, Page 37
Product sorting
List of products
Suction cup SF with a diameter of 22 mm in flat design. Made of 50°Sh silicone. Designed for the transport of flat objects where a parallel force to the surface of the object...
Replacement diaphragm for A2 - A2MR-14 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Termination box for terminating compressed air piping. Input 22 mm socket coupling and output 2 x 1/2". Easy connection of hoses, tyre tools and other accessories. Working...
FoxiBase PUR SL-SE suction hose with a diameter of 120 mm made of 0.55 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Suction cup SF with diameter 16,5 mm in flat design. Made of 50°Sh silicone. Designed for the transport of flat objects where a parallel force to the surface of the object...
Mounting angle for air handling units A2R-38, A2S-38. Attachment by means of a lock nut on the pressure regulator.
Replacement diaphragm for A2 - A2MR-38 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Spring balancer for suspension of pneumatic tools with a load capacity of 0.5 to 1.5 kg and a stroke of one metre.
Functional fittings - non-return valves. Check valves designed for air flow in one direction only, brass design, pressure 10 bar, tubular design with internal threads 1/2".
Deformation hose coupling EWD1 with a range of 37 to 40 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....
Black SBR barrel, black SBR sleeve 20/13 mm diameter with longitudinal positive grooving, textile pressure braid. Hose designed for the transport of water and glycol-based...
Internal/external thread reduction G1 1/2" - G2". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed...
EGW deformation hose coupling with a range of 5.6-6.5 mm and a tape width of 5.5 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
FBW deformation clamp with a range of 15.8mm. Made of W1 material - white zinc plated steel compliant with RoHS guidelines. Designed for easy installation of PVC and rubber...
Pipe thread reducer A001 with female thread G 1/4", length 17. External thread G 3/4" with length 11. Version in brass with nickel-plated finish. Applications for fluid power,...
Box with condensate discharge from compressed air piping. Easy connection of hoses, tyre tools and other accessories. Inlet G1/2" and outlet 1 x quick coupling DN7,2. Working...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...
Socket coupling in plastic corner design with 3/8" male tapered thread. Quick and easy installation of plastic tubing with 12 mm outer diameter. Designed especially for...
Straight socket couplings for air piping with internal pipe thread G 1" for pipe with outer diameter 22 mm. Simple Air Push socket system that can be disassembled again. No...
Designed for G 1/8" thread. The inner diameter is 10.3 mm and the outer diameter is 13.0 mm. Basic sealant for sealing threaded joints in pneumatic equipment.
V-belt reciprocating compressor with an output pressure of 10 bar designed especially for occasional use in craft applications. Mobile oil-lubricated version with an engine...
Designed for M5 thread. The inner diameter is 5.3 mm and the outer diameter is 8.0 mm. Basic sealant for sealing threaded joints in pneumatic equipment.
Replacement container for filter unit A2 - A2NF-12. Simple container change with lock on the following units: A2F-12, A2S-12, A2U-12.
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range of 40-60 mm. Manufactured according to...
Inner tube and outer casing made of SBR/NBR rubber - black, abrasion and weather resistant, 36/25 mm diameter. Reinforcement high-strength textile braid and steel spiral. Hose...
Polyamide PA12 10/8 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening screw and...
Pipe thread reducer A001 with female thread G 1/8", length 15. External thread G 1/2" with length 9. Version in brass with nickel-plated finish. Applications for fluid power,...
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 1500 mm and straight ends.
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 20-32 mm. Manufactured according to DIN 3016. With house and tightening...
Shock absorbers in MA225M adjustable design with M20x1,5 thread. Spring force 5 to 10 N.
The straight fitting with 10/8 mm hose nut and G3/8" male pipe thread ensures a reliable connection from plastic hoses up to 15 bar. Particularly suitable for applications...
Nipple ESN - male quick coupling DN7,2 with hose shank 9 mm. Version nickel-plated brass with one-way closable valve at the quick coupling - female. New mandrel contour for...
Plastic pipe PA12 for compressed air piping. Pipe size 22/18 mm with recommended operating pressure 13 bar. Classic blue colour as marking for air ducts. Easy connection with...
Standard connection set for FUTURA size 2 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 110-130 mm. Manufactured according to...