BH 40-10, Page 4
Product sorting
List of products
Short nut M8 for BH 40-10, BH 45-10 and BH 50-10 slots, made of stainless steel.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.
A set of parts for the quick and secure fixing of panels for fencing made from grooved profiles of the BH 40-10, BH 45-10 and BH 50-10 series.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity 2200 kg.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Floor bracket for mounting on 40 mm wide profiles using M8 screws.
Handle made of black polyamide, dimensions 146x44 mm.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium end cap for 80x80 duct profile.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Door stop with dimensions 56x30 equipped with a magnet.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Grey plastic end cap for closing the groove of BH 40-10, 45-10 and 50-10 series profiles.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Magnetic stop for detachable door installation.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Short nut M6 for BH 40-10, BH 45-10 and BH 50-10 slots, made of stainless steel.
Flange for attaching bases and castors to 80x80 profiles with M16 thread.
Flange for attaching bases and castors to 40x80 profiles with M16 thread.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
The 80x80 aluminium profile allows for the creation of cable channels.
Gas spring with 110 mm stroke and 150 N force.
Coupling for creating a pivoting joint between BH 40-10 series profiles with a 40x40 section.
PVC seal for profile groove to attach 3 mm thick panels to grooves of AC 40-8, AC 45-8 and IM 40-8 series or 5 mm thick panels to grooves of BH 40-10, BH 45-10 and BH 50-10...
Swivel castor with a diameter of 60 mm for mounting using a central hole with a diameter of 12 mm, equipped with a brake.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Horizontal alignment connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for connecting profiles from the outside using M8x16 screws. Design with guide tabs.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.