Compressed air hose, Page 13
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Heavy-duty hose with good resistance to impact, microorganisms and salty solutions in black with 4/2.5 mm dimensions. The use of plastic PE tubing especially in industry,...

Deformation hose clamp EWS4 range 13,8 to 16,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

Blue-black plastic hose, 6/4 mm. Made of branded Elastollan C98 granulate. Suitable for multiple connections to pneumatic cylinders and valves. Operating temperature -40/+60 °C...

Hose clamp SW1 - 16mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...

Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New mandrel...

EGW deformation hose coupling with a range of 10.3-12.3 mm and a tape width of 7.4 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

Hard nylon tubing in clear 10/8 mm with excellent pressure resistance properties designed for longer straight lines. High resistance of PA6 polyamide to moisture, salt water,...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1000 mm with straight and...

PMW 18mm hose clamps for small diameter hoses. Fitted with a hinge pin. Made of white galvanized steel. Use in industry and auto repair.

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 50-70 mm. Manufactured according to DIN 3016. With house and...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1500 mm and straight end...

Hose clamp PW1 19 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

Polyamide PA12 10/8 mm tubing in black anti-static version with ATEX II 2 G/D certification. Operating temperature -30/+80 °C. Tubing for applications with demanding safety...

Hose PA12 blue, 12/9 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...

Suction hose FoxiBase PUR SL-SE0,4 with a diameter of 127 mm made of abrasion-resistant polyester-polyurethane foil 0,4 mm thick with a steel wire spiral. Transparent body with...

Hose PA12 blue, 8/6 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

Temperature-resistant and food-safe silicone tubing 10/5 mm in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...

Deformation hose coupling EWD1 with a range of 28 to 31 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hose range 16-27 mm. Manufactured according to DIN 3016. With house and tightening...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 50-70 mm. Manufactured according to DIN 3016. With house and tightening...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 1500 mm with straight and...

Clear hose with dimensions 12/9 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

Deformation hose coupling EWD1 with a range of 22 to 25 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 80 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Vacuum hose with inner diameter 35 mm and working temperature -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard. Suitable for...

Vacuum hose with an inner diameter of 32 mm and an operating temperature of -5/+65°C. Made of soft PVC, reinforced with steel spiral, in compliance with the 2007/19/EC standard....

LPH press ring with diameter 19,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Blue transparent PVC hose with dimensions 15/9 mm reinforced with high strength PES fibre is designed for transport of filtered compressed air free of oils and condensate....

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 76 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...