Compressed air hose, Page 17
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Screw hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 100-120 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W4 - AISI 304 stainless steel with 9 mm wide band for hoses with a range of 130-150 mm. Manufactured according to DIN 3016. With house and...

FoxiPro PUR L suction hose with a diameter of 45 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2500 mm and straight ends.

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. 1" threaded version in 2000 mm length and straight end caps.

PW4 51mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

Black SBR barrel, black SBR sleeve 23/16 mm diameter with longitudinal positive grooving, textile pressure braid. Hose designed for the transport of water and glycol-based...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 2500 mm and straight ends.

Green PUJ polyurethane tubing 12/8 mm, especially suitable for mechanically stressed lines, excellent flexibility. High resistance to oxygen, ozone, vibration and aging. Use...

FoxiPro PUR L suction hose with a diameter of 45 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...

Hose made of PU Elastollan C-98 cyan, size 8/6 mm.Plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

PW4 19mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Female quick coupling DN7,2 with shank, swivel nut and protection spring for 8 x 6 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...

LPH press ring with a diameter of 38 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Hose made of PU Elastollan C-98 red, 4/2,5 mm. plastic hoses designed especially for compressed air, manipulators and automation technology. Operating temperature -40/+60 °C...

LPH press ring with a diameter of 41 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

The inner length is 940 mm and the calculated length is 970 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 120-140 mm. Manufactured according to...

High-quality blue spiral hose 6/4 mm with extreme spiral return capability of 4 m and long service life. Made of branded granulate elastollan 1190 without end quick connectors....

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2000 mm with straight and...

LPH press ring with a diameter of 30 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2500 mm and straight ends.

Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 100-120 mm. Manufactured according to...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 40-60 mm. Manufactured according to DIN 3016. With house and...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-50 mm. Manufactured according to DIN 3016. With house and...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2000 mm with straight and...

The inner length is 1 300 mm and the calculated length is 1 330 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 320 mm and the calculated length is 1 350 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 400 mm and the calculated length is 1 430 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Clear hose with dimensions 15/12 mm and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

PW4 22mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

The inner length is 1 120 mm and the calculated length is 1 150 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 180 mm and the calculated length is 1 210 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 200 mm and the calculated length is 1 230 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 250 mm and the calculated length is 1 280 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...