Compressed air hose, Page 20
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
_(1).jpg)
.png)
Product sorting
List of products
ES male male quick coupling DN7,2 with coupling nut and protective spring for 6,5 x 10 mm hose. Pure brass version MS 58 with one-way closable valve at female quick coupling....
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm grey. Special pressure hoses for easy assembly without the need for hose...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm blue. Special pressure hoses for easy assembly without the need for hose...
PW1 121 mm strength hose clamp with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry...
Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion in dimensions 30/19 mm. Outer shell made of SBR rubber - black, abrasion and weather...
The 12/10 mm Teflon TFE Milk Tubing are tubing with excellent resistance to chemicals and high temperature. Ideal dielectric properties, resistance to the effects of oxygen,...
High-quality blue spiral hose 6/4 mm with extreme spiral return capability of 4 m and long service life, including end quick couplings. Made of branded granular elastollan 1190....
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Clear tubing with 14/10 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils,...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 240-260 mm. Manufactured according to DIN 3016. With house and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2000 mm with straight and...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1500 mm with straight and...
Hose clamp PW1 112 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
FoxiVulca Sil1 60 mm diameter suction hose made of fibreglass-coated silicone with steel wire spiral. Single-layer design. Designed for the transport of high temperature gases,...
Inner tube made of SBR/NBR rubber - smooth, black colour, resistant to oil dispersion in dimensions 39/25 mm. Outer shell made of SBR rubber - black, abrasion and weather...
SW4 50mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/2" in length 1500 mm and straight ends.
Pressure hose for pressurised hot water mixed with steam and for transporting coolants with a diameter of 30/22 mm. Black EPDM inner tube, temperature, coolant and ozone...
FoxiPro PUR L suction hose with a diameter of 38 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
The inner length is 1 300 mm and the calculated length is 1 330 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
FoxiBase PUR SL-SE suction hose with a diameter of 102 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
The blue plastic spiral hose 8/5 mm made of polyurethane in 10 m length, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The...
SW4 35mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1" in length 2500 mm and straight ends.
The inner length is 1 250 mm and the calculated length is 1 280 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Pressure hose with hose diameter 26/19 mm in all-black design. Designed primarily for the transport of hot media - water, air and chemicals, especially in the plastics industry....
Pressure hose with hose diameter 26/19 mm in black with blue stripe. Designed primarily for the transport of hot media - water, air and chemicals, especially in the plastics...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 80-100 mm. Manufactured according to DIN 3016. With house and tightening...
Hose clamp SW4 110mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 23/16 mm green. Special pressure hoses for easy assembly without the need for hose...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 12,5/6 mm red. Special pressure hoses for easy assembly without the need for hose...
FoxiPro PUR XL suction hose with a diameter of 80 mm made of abrasion-resistant polyester-polyurethane foil with a 2.5 mm thick steel wire spiral. Smooth inside for exceptional...
LPH press ring with diameter 13,5 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
The inner length is 1 630 mm and the calculated length is 1 660 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 730 mm and the calculated length is 1 760 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 810 mm and the calculated length is 1 840 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
The inner length is 1 580 mm and the calculated length is 1 610 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 100-120 mm. Manufactured according to...
Flexible hose 21/13 mm for transport of unleaded fuels, heating oil and compressed air, electrically conductive hose. NBR inner tube, black smooth, CR/NBR sheath black smooth,...