Compressed air hose, Page 24
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Quick coupling nipple swivel with protective spring for hose 8 x 12 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is...

FoxiPro PUR L suction hose with a diameter of 60 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...

Fixed fitting with R1/2" male tapered thread for 11 x 16 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

FoxiPro PUR XL suction hose with a diameter of 115 mm made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional...

Hose endless belt with a width of 14 mm and a length of 25 m. Also included are 50 locks for custom use of individual lengths. Supplied in stainless steel. Designed for the...

The inner length is 920 mm and the calculated length is 950 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production...

FoxiBase PUR SL-SE suction hose with a diameter of 102 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Hose clamp stand CH-01 made of steel wire. Can be placed on a desk or hung on the wall. Allows you to keep an overview of the hose clamps.

PW4 59mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...

Hose clamp PW1 239 mm with tightening screw on hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with quick assembly...

Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 70-90 mm. Manufactured according to DIN 3016. With house and...

Clear tubing with 8/4 mm dimensions and excellent pressure resistance for longer straight lines. PA11 Rilsan guarantees high resistance to moisture, salt water, oils, chemicals...

FoxiPro PUR XL 70 mm diameter suction hose made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with steel wire spiral. Smooth inside for exceptional abrasion...

Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hose range 20-32 mm. Manufactured according to DIN 3016. With house and tightening screw and...

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 225 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Fixed quick coupling with protective spring for 5 x 8 mm hose in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...

EGW deformation hose coupling with a range of 19.2-21.8 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....

FoxiBase PUR SL-SE0.4 suction hose with a diameter of 250 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

The inner length is 998 mm and the calculated length is 1 020 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 098 mm and the calculated length is 1 120 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 123 mm and the calculated length is 1 145 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 143 mm and the calculated length is 1 165 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 2500 mm and straight ends.

Fixed quick coupling with protective spring for hose 8 x 12 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...

Quick coupling swivel with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...

The inner length is 1 450 mm and the calculated length is 1 480 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...

The inner length is 1 550 mm and the calculated length is 1 580 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...