Compressed air hose, Page 27
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers
List of products
SW4 140mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Swivel fitting with female pipe thread G3/8" for hose size 9 x 13 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...
Fixed quick coupling with protective spring for 4 x 6 mm hose in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Hose clamp for attaching right-hand spiral suction hose with foil construction in the range of 50-70 mm with 0.4 to 0.75 mm wall. Easy assembly and perfect sealing thanks to the...
PW4 213mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Quick coupling swivel with protective spring for hose 6.5 x 10 mm in DN7.2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
FoxiPro PUR L suction hose with a diameter of 76 mm made of abrasion-resistant polyester-polyurethane foil with a 1.45 mm thick steel wire spiral. Designed for granulate...
SPR 333 handheld assembly machine with two interchangeable jaws with a range of 3-20mm and 10-19mm. Ensures joint cleanliness, reduces assembly time. Designed for manual, simple...
SW4 115mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
SW4 180mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Hose clamp SW4 195mm fitted with two tightening screws on a hose clamp. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber hoses,...
Worm hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 30-45 mm. Manufactured according to DIN 3016. With house and tightening...
The blue plastic spiral hose 8/5 mm made of polyurethane in 10 m length, including fitted end caps, is characterized by high resistance to breakage, abrasion and pressure. The...
High quality yellow spiral hose 12/8 mm with extreme spiral return capability of 7.5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed...
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and...
Female quick coupling DN7,2 with shank, swivel nut and protection spring for 12 x 8 mm hose. Design in pure brass MS 58 with one-way closable valve. New mandrel contour for...
EGW deformation hose coupling with a range of 15.6-17.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
High quality blue spiral hose 12/8 mm with extreme spiral return capability of 10 m and long service life. Made of branded granulate elastollan 1190 without end quick...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 70-90 mm. Manufactured according to DIN 3016. With house and tightening...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 26,2/19 mm grey. Special pressure hoses for easy assembly without the need for hose...
Quick coupling swivel with protective spring for hose 9 x 13 mm in DN5. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
Quick coupling swivel with protective spring for 5x 8 mm hose in DN7,2. Designed for spiral hoses. All end caps can be disassembled and are reusable. It is characterized by...
LPH press ring with a diameter of 41 mm. Made of annealed steel, galvanized and yellow chromated. Assembling using the SPR 333 manual assembly machine. Prevents injury. Designed...
Serrated V-belt with a calculated length of 1 037 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 047 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
Serrated V-belt with a calculated length of 1 077 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various production machines.
FoxiPro PUR XL suction hose with a diameter of 115 mm made of abrasion-resistant polyester-polyurethane foil 2.5 mm thick with a steel wire spiral. Smooth inside for exceptional...
Hose clamp PW1 226 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
PW4 97mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
High-quality red spiral hose 8/5.5 mm with extreme spiral return capability of 5 m and long service life, including end quick couplers. Made of branded granular elastollan 1190....
Nickel-plated quick-couplings DN7.2 with shank, swivel nut and protection spring for 10 x 8 mm hose. Version in nickel-plated brass MS 58 with one-way closable valve. New...