Compressed air hose, Page 36
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Bestsellers

Deformation hose clamp EWS4 range 4,1 to 5,1 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...

For hose type PU 8 × 11 with a length of 5 m. Parts made of corrosion-resistant materials. Equipped with 1 m inlet hose. Automatic hose retraction with length adjustment. Total...

FoxiBase PUR SL-SE 0.4 suction hose with a diameter of 51 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane foil with a steel wire spiral. Transparent body with...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1/2" in length 2500 mm with straight and...

FoxiPro PUR L suction hose with a diameter of 130 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Hose clamp designed for hose diameters 60-660 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Fixed fitting with female pipe thread G3/8" for hose size 9 x 13 mm. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

Hose PA12 cyan, 4/2.5 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

Black plastic hose with 12/9 mm diameter and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high...

FoxiPro PUR L suction hose with a diameter of 225 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Clear plastic hose with a diameter of 12/9 mm and high flexibility requirements. Operating temperature -40/+80 °C. Suitable for high pressure, chemical resistance and high...

Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 3/4" in length 1000 mm with straight and...

PA12 black hose, 6/4 mm, manufactured according to DIN 73378 / 74324. Polyamide LongLife excellent dimensional stability at higher temperatures. Operating temperature -40/+100...

Fixed fitting with R1/4" male tapered thread for 4 x 6 mm hose. The end caps are detachable - they can be used again. Construction with extreme resistance to pressure and...

FoxiPro PUR L suction hose with a diameter of 32 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...

Hose clamp designed for hose diameters 60-425 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...

Inner tube of black EPDM, smooth; outer jacket of black EPDM, well resistant to weathering and ageing. Hose diameter 42/32 mm. Reinforcement high-strength textile braid; working...

Silicone tubing 14/10 mm temperature-resistant and food-safe in transparent design. Operating temperature -60/+200 °C complies with FDA and 1935/2004 EC directives. Designed for...

SW4 160mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...

FoxiPro PUR L suction hose with a diameter of 90 mm made of 0.75 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...