Pneu and Aku tools with gun technology, Page 10
-
Cordless tools M7; professional AKU tools
-
Pneumatic tools; air-powered tools
-
Blow guns; various guns and nozzles
-
Tire inflator; and all accessories
-
Spray guns; for paint shops and craftsmen
-
Blasting gun; blasting of trimmed surfaces
-
Pistol sets; Professional KIT
-
Suction guns; extraction of chips and dirt
-
Balancers and balancers; for hanging tools
-
Blow-off taps; taps and accessories
-
Washing gun; pressure washing with water
Bestsellers
Spray gun with upper container and 1.5 mm nozzle for painting with the possibility of adding different nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
SG990S spray gun with 750 ml bottom container and 1.5 mm nozzle with the possibility of adding additional nozzle sets. Regulation of the colour and shape of the beam. Spray guns...
The SGH501 spray gun is a high-end model for industrial use equipped with HVLP technology with a 65% transfer efficiency. It has a stainless steel nozzle and needle, 500ml...
The SGH827-14 spray gun is an extremely economical model with LVLP technology that provides high transfer efficiency and fine atomization of paint at low pressure and low air...
Hardened square reducer with a diameter of 25 mm and a height of 38 mm equipped with a ball. Inner square 1/2" with reduction to outer square 3/8".
The professional tyre inflator with Ø80 mm pressure gauge offers a convenient pressure reading thanks to the clear double bar/psi scale. It is equipped with a rear connection,...
The professional tyre inflator with Ø80 mm pressure gauge offers a convenient pressure reading thanks to the clear double bar/psi scale. It is equipped with a rear connection, a...
Spare 750 ml bottom container for SG990S spray guns in aluminium bottom version.
500 mm long hose with base valve as accessory for the TGE-TGD wheel inflator. Connection of the hose with G1/4" thread.
Hose 300 mm long with lever valve as accessory for the TG-09 wheel inflator. Connection of the hose with G1/4" thread.
Basic accessories for the Profipaint HVLP spray gun. Jet set 1.3 mm.
The SGH1000 spray gun is a high-end HVLP spray gun designed for decorative spraying in the craft and industrial markets. It has a 250 ml container, stainless steel nozzle, 65%...
Robust tyre inflator designed for inflating passenger car tyres in a professional design, e.g. for tyre workshops. Manometer with 63 mm diameter and rubber protection, hose...
Lever valve for inflating wheels and tyres as an accessory for TG-09 compressed air inflators.
The Mighty Seven DS-203 is a cordless impact driver and impact wrench in one, equipped with a top-of-the-line carbon-free motor. It offers an extremely high tightening and...
Container for mixing colors. Special container for the preparation of paints. Available in two sizes, made of polypropylene. Lid of container 1850 ml
Container for mixing colors. Special container for the preparation of paints. Available in two sizes, made of polypropylene. Lid of container 920 ml
Tyre inflator for tyre inflation in craft and domestic applications. Tightening by lever, venting by button on the back of the gun. Digital display for accurate pressure...
Container for mixing colors. Special container for the preparation of paints. Available in two sizes, made of polypropylene. Container insert 920 ml
Rotary bicycle valve GN-TI - by mounting the valve on the bicycle, you can also use the deflation gun to inflate tyres.
Replacement plastic container cap for SBG12 blast gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg...
Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1 kg of abrasive. Nozzle made of hardened steel with a...
Filling valve, 1/2" male thread as accessory for pneumatic wheel and tyre inflator - TGA-V
The suction gun is used for suctioning chips, dust and small dirt from work surfaces. Creating a vacuum from a stream of compressed air. Made of aluminium, equipped with 250 mm...
Set of 14 nuts for impact wrenches with 1/2" clamping square. Standard height 38 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened...
Set of 10 nuts for impact wrenches with 1/2" clamping square. Extended design for good handling in deep spaces. Dimensions in set - all sizes from 10 to 27 mm. Hardened steel...
Container for mixing colors. Special container for the preparation of paints. Available in two sizes, made of polypropylene. Mixing container 1850 ml
Container for mixing colors. Special container for the preparation of paints. Available in two sizes, made of polypropylene. Mixing container 920 ml
Set of 11 nuts for impact wrenches with 1/2" clamping square. Standard height 38 - 42 mm for good handling in small spaces. Dimensions in set - all sizes from 10 to 32 mm in 1...
Miniature pressure regulator for direct mounting on the spray gun inlet. Allows precise adjustment of the pressure entering the gun. Equipped with pressure gauge and manual...
Small handheld spray gun with excellent spray quality for the most demanding applications. Particularly suitable for smaller areas and decorative spraying in the auto paint...
Universal hand spray gun with excellent spray quality for the most demanding applications. Ergonomically designed body for easy handling and increased spray quality; extremely...
High-quality blast gun for rust removal by blasting with abrasive sand in areas where the surface cannot be sandedand prepare it for painting. Designed for abrasives with grain...
Replacement bottom plastic container 750 ml for SBG12 gun. Designed for abrasives with grain sizes from 0.1 to 0.8 mm; version with 700 ml bottom plastic container for approx. 1...
Basic accessories for the Smartpaint HVLP spray gun. Upper container, plastic 75 ml .
The 1.8 mm nozzle set for SGM502 is designed for thicker coatings such as fillers, primers or thicker paints. It provides a higher flow rate, uniform spray pattern and is ideal...
The 1.2 mm nozzle set for SGM502 is suitable for fine coatings, topcoats and thin paints with paint supply from an external tank. It offers precise spraying, a clean surface and...
The 1.4 mm nozzle set for SGH2007R is designed for topcoats, acrylic paints and clearcoats. It offers high precision, even spraying and professional results for everyday use in...
The 1.5 mm nozzle set for SGM502 is the ideal choice for universal painting - from base coats to topcoats. Designed for guns with external paint reservoir, it offers high...
The 1.7 mm nozzle set for SGH2007R is ideal for primers, fillers and denser materials. It offers higher paint flow, uniform spraying and reliable performance in both automotive...