M7 air-powered pneumatic tools, Page 7
-
Impact wrenches; pneumatic design
-
Ratchet wrenches; pneumatic design
-
Nuts for tighteners; cast iron
-
Shank grinders; pneumatic design
-
Angle grinders; pneumatic design
-
eccentric grinders; pneumatic design
-
Sheet metal cutters; pneumatic design
-
Car body saws; pneumatic design
-
Drills; pneumatic design
-
Screwdrivers; pneumatic design
-
Chopping hammers; pneumatic design
-
Riveting pliers; pneumatic design
-
Staplers and nailers; pneumatic design
-
Pressure lubricators; pneumatic design
-
Balancers; professional design M7
-
Other tools; pneumatic design
Product sorting
List of products
Set of 5 grinding wheels with 3 mm shank. Designed for pneumatic tools and miniature and shank grinders powered by compressed air.
Set of 3 nuts for impact wrenches with 1/2" clamping square. Color differentiation of individual dimensions. Extended version for deep-set screws, height 85 mm. With a ceramic...
Set of 6 nuts for impact wrenches with 1/2" clamping square. Shortened length of only 28 mm for good handling in small spaces. Dimensions 13-17-19-21-22-24 mm. Hardened design...
Set of 5 nuts for impact wrenches with 1" clamping square. Delivered in a practical case for easy transport. Dimensions in set 33 - 35 - 38 - 41 mm and 1 1/2". Hardened design...
Straight grinder with shank clamping for grinding smaller parts; shank clamping with the possibility of using 3 or 6 mm shank bodies. Working pressure 6.3 bar, equipped with...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 11 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 12 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 18 mm screws.
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 23 mm screws.
Small straight grinder with 6 mm shank with 25,000 idle speed, working pressure 6.3 bar and air consumption 100 l/min.
Hardened square reducer with 35 mm diameter and 48 mm height equipped with ball. Inner square 1/2" with reduction to outer square 3/4".
Hardened square reducer with 46 mm diameter and 68 mm height equipped with ball. Inner square 3/4" with reduction to outer square 1".
Vibratory sander for sanding wooden and metal surfaces, without suction. For rectangular sandpaper, paper fixing by wire mechanism. Low centre of gravity for uniform grinding;...
Replacement head for QG-103 sheet metal cutter. Designed for sheet metal separation with perfect handling and cutting in all directions. Sheet metal cutter designed for...
Special pneumatic tools for cutting round holes in sheet metal in the metalworking and auto repair industry. Version for bore diameters of 5 mm, sheet thickness up to 1.6 mm,...
Grinding belt for belt grinders 1 pcs. QB-313P58- 30 x 540 mm roughness *80.
Special pneumatic tools for cutting round holes in sheet metal in the metalworking and auto repair industry. Version for 58 mm bore diameters, with sheet thickness up to 1.6 mm,...
Robust tyre inflator designed for inflating truck tyres in a professional design, e.g. for tyre workshops, workshops of transport companies and forwarding companies. Manometer...
Robust tyre inflator designed for inflating passenger car tyres in a professional design, e.g. for tyre workshops. Manometer with 63 mm diameter and rubber protection, hose...
Practical straight grinder set with necessary accessories; the set includes the QA-211A straight grinder for grinding smaller parts. Working pressure 6.3 bar, designed for...
Angle grinders in angular design designed primarily for grinding smaller parts. Practical 97° angle reduces wrist strain when working, composite handle to reduce cold sensation....
Balancers for hanging pneumatic tools above the workstation allow easy tool stowage at height, saving space. Cast aluminum body. The installed hook allows 360° rotation. Long...
Quick-release sockets for M7 SC-221C and SC-222 pneumatic chisel hammers. Can be exchanged for other sockets, extensions and springs.
LED lighting in the form of a stick for illuminating hard-to-reach areas in the workplace from the popular manufacturer of pneumatic tools M7. Rubberised plastic design for...
The M7 air tool bag from the same manufacturer of these tools will give your service technicians an easy way to carry their air tools, which they will always have on hand thanks...
Replacement pads for eccentric grinders with wheel diameters of 152 mm. Designed for M7 pneumatic tools powered by compressed air.
Pneumatic nail gun for professional use; handle with non-slip rubber coating for good grip during work. Designed for T-nails up to 30 mm high; working pressure 6.3 bar. Designed...
Pneumatic nail gun for professional use; handle with non-slip rubber coating for good grip during work. Designed for T-nails up to 50 mm high; working pressure 6.3 bar. Designed...
Flash drive to USB in size ? MB as an illustration of the impact tightener from the popular air tool manufacturer M7. Rubberized design. Reward in the bonus program.
A series of professional eccentric grinders for grinding metal surfaces, wood, leather products, etc.. Model for discs with diameters of 127 mm; attachment of discs by Velcro....
Composite impact wrench with 1/2" clamping square for tightening and loosening smaller screws up to M16. The mini version with a length of only 120 mm and a low weight of 1.38...
The most powerful 3/4" clamping impact wrench with double hammer impact. Two-hand design for better handling, ergonomically shaped handles. Working pressure 6.3 bar; designed...
Belt sander for grinding small surfaces, easy access to narrow spaces; working pressure 6.3 bar. Designed for normal professional use; areas of application: woodworking,...
Industrial quality twin dog impact driver suitable for all screwdriving applications in wood, plastics and metals. Model in pistol version with capacity for screws up to M8,...
Case set of NC-4650 tightener + 7 sockets (13, 17, 19, 21, 22, 24, 27 mm) + extension 125 mm + mini oiler SW-12 + socket for quick coupling. Clamping square 1/2" for tightening...
Special tool for cutting threads in metal materials with capacity M3 - M8 in steel and M3 - M12 in copper. Areas of application: industry, crafts, metal production.
Ratcheting screwdriver with 3/8" clamping square for loosening and tightening small screws. Right and left-hand operation for tightening and loosening; working pressure 6.3 bar....
Device for verifying the torque magnitude of impact wrenches. Electronic design with display of the achieved torque. Designed primarily for service centers and tire shops with a...