BH profiles and accessories, Page 3

Plastic end cap for 25x40 angle bracket in grey.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Universal angle bracket with a 90° angle and dimensions of 28x27 for connecting profiles from the outside using M6x16 screws. Design with guide tabs.

Rubber insert for stop pin 084.523.003.

Universal angle bracket with a 90° angle and dimensions of 28x27 for connecting profiles from the outside using M6x12 screws.

Universal angle bracket with a 90° angle and dimensions of 18x40 for connecting profiles from the outside using M8x20 screws.

Threaded bushing M12/M8 for creating an internal thread in the centre bore of BH 40-10, 45-10 and 50-10 series profiles.

Clip for securing cables to aluminium profiles.

Plastic handle cover 084.505.001, orange colour.

Short nut M4 for grooves BH 40-10, BH 45-10 and BH 50-10.

Short nut M5 for grooves BH 40-10, BH 45-10 and BH 50-10.

Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8/M10 screws. Design with guide tabs.

Plastic cap for 38x36 angle bracket in grey.

Universal angle bracket with a 90° angle and dimensions of 42x41 for joining profiles from the outside using M8x20 screws. Design with guide tabs.

Square washer 19x19 with D=12.5 mm hole.

Plastic cap for the base of a 45x45 profile.

Shimming base for block 084.510.001 with a height of 3 mm.

Spacing base for block 084.510.001 with a height of 2 mm.

Spacing base for block 084.510.001 with a height of 5 mm.

Pan head screw S12x30 made of galvanised steel

Polyamide handle with dimensions 113x35 mm, blue colour.

Universal angle bracket with a 90° angle and dimensions of 18x18 for joining profiles from the outside using M5x12 screws (AC 30-6 series) or M5x8 screws (BH 20-6 series)....

Angle bracket for groove for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.

Angled grab bar made of grey polyamide, measuring 128x43 mm.

Universal angle bracket with a 90° angle and dimensions of 18x40 for connecting profiles from the outside using M6 screws.

M12x30 galvanised steel pan head screw

Block for fixing panels with a nut for mounting into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.

Block for fixing glass panels with a thickness of 1 to 8 mm to the outer edge of the profile.

Corner bracket for slot for connecting BH 20-6 series profiles at a 90° angle.

Polyamide handle with dimensions of 113x35 mm, black colour.

PVC seal for profile groove for attaching panels with a thickness of 3 mm to grooves with a width of 6 mm or and with a thickness of 5 mm to profiles with a groove of 8 mm.

Plastic end cap for 30x30 profiles in black

Angle bracket for joining profiles with a 30x30 section at a 45° angle.

Angle bracket for joining BH 45-10 series profiles with a 45x45 cut at a 45° angle.

Polyamide handle with dimensions 113x35 mm, orange colour.

Plastic end cap for 50x50 profile in black

Small 90° angle bracket with dimensions 30x30 for joining profiles from the outside using M6 countersunk screws.

Short nut M6 for grooves BH 40-10, BH 45-10 and BH 50-10.

Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.

Rubber base pad insert with a diameter of 40 mm.