BH profiles and accessories, Page 9

Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.

Groove connector for direct connection of BH 30-8 and IM 40-8 series profiles.

Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.

Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.

Cover strip for closing channel profile 80x80.

Plastic end cap made of softened PVC for closing the groove of profiles series BH 40-10, 45-10 and 50-10 in grey.

Universal angle bracket with a 90° angle and dimensions of 42x41 for joining profiles from the outside using M8x20 screws. Design with guide tabs.

Flange for blanking off the end of a 45x90 profile connected to a compressed air source.

Door stop 59x30 with hole for magnet D=18 mm, made of black polyamide. Suitable for front mounting of doors flush with the profile.

Handle made of black polyamide with dimensions of 129x44 mm.

Floor angle bracket for mounting on profiles with a width of 45 mm.

Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.

Corner connector for connecting 3 profiles of the AC 45-8 or BH 45-10 series with a 45x45 cut at a 90° angle.

Plastic end cap for 20x20 profiles in grey

Plastic end cap for 20x20 profiles in black

Flange for attaching bases and castors to 80x80 profiles with M16 thread.

The 80x80 aluminium profile allows for the creation of cable channels.

A 200 mm long tubular handle made from a combination of rubberised aluminium tubing with a 15 mm diameter and polyamide connecting parts in grey.

Aluminium hinge with dimensions 100.5x80, for 45/45 profiles.

Handle made of black polyamide, dimensions 146x44 mm.

Aluminium end cap for 80x80 duct profile.

Universal angle bracket with a 90° angle and dimensions of 43x43 for connecting profiles from the outside using M8/M10 screws. Design with guide tabs.

The 45x45 aluminium profile allows for the creation of channels with cables.

Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.

Aluminium profile with a modular section dimension of 45x60 and with 4 grooves of BH 45-10 shape. Heavy-duty version with a weight of 2.80 kg/m.

Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.

Aluminium profile with a modular cross-sectional dimension of 90x90 with 8 BH 45-10 shaped grooves. Heavy-duty version with a weight of 6.50 kg/m.

Aluminium profile with a modular cross-sectional dimension of 90x90 with 8 BH 45-10 shaped grooves. Lightweight version with a weight of 4.86 kg/m.

Aluminium profile with a modular cross-sectional dimension of 90x90 with 8 BH 45-10 shaped grooves. Version with internal partitions to the central opening.

Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.

Connecting plate for creating a perpendicular joint between profiles with a 50x100 section.

Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.

Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.

Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.

Aluminium hinge with dimensions 81x64, for 40/40 profiles.

Pin for connecting the rotary switch to hinges 084.503.002 and 084.503.003.

Set of 2 end pieces for creating a tubular handle with a diameter of 32 mm, black colour.

Aluminium profile with a modular cross-sectional dimension of 100x100 with 8 grooves of BH 50-10 shape.

Plastic cover for angle bracket 86x86 in black.

Flange for connecting a 45x90 profile to a compressed air source, with a 1/2" thread.