IM profiles and accessories, Page 4
Product sorting
List of products
Square nut M4 for BH 30-8 and IM 40-8 slots, with guide.
Square nut M5 for BH 30-8 and IM 40-8 grooves, with guide.
Square nut M6 for BH 30-8 and IM 40-8 grooves, with guide.
Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.
Plastic end cap for 20x40 profiles in black
Floor bracket for mounting on 40 mm wide profiles using M8 screws. Version with lateral support.
Square nut M4 for BH 30-8 and IM 40-8 grooves, equipped with guide and perpendicularly positioned spring.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Floor bracket for mounting on profiles with a width of 30 mm.
Rubber base pad insert with a diameter of 50 mm.
Aluminium cover for chamfered channel profile 80x80 with IM 40-8 grooves.
Handle made of black polyamide, dimensions 108x38 mm.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Cover strip for closing channel profile 80x80.
Panel fixing block for thicknesses of 1 to 8 mm.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Base with a diameter of 100 mm and an M16 connection thread. Base load capacity of 1000 kg.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Plastic cap for bases 084.409.004 and 084.409.002.
Connector for creating a swivel joint between profiles with a 40x80 section.
Square base for mounting on 80x80 section profiles.
Aluminium end cap for channel profile 45x45.
Universal angle bracket with a 90° angle and dimensions of 38.5x76 for connecting profiles from the outside using M8x20 screws. Design with guide tabs.
Aluminium profile with a modular cross-section size of 60x60 and with 8 IM 30-6 shaped grooves.
The 45x45 aluminium profile allows for the creation of channels with cables.
Flange for attaching bases and castors to AC 30-6 and IM 30-6 series profiles with a 30x60 section, equipped with an M12 thread.
Plastic end cap for 60x60 profiles in black.
Flange for attaching bases and castors to 40x80 profiles with M12 thread.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.
Universal angle bracket with a 90° angle and dimensions of 40x38.5 for joining profiles from the outside using M8x20 screws. Design with guide tabs.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Adjustable foot 40x100 mm with M8 thread
Aluminium drill bit with a diameter of D=7.5 mm.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Aluminium hinge with dimensions 65x42, profile profile 30/panel.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 40/40.