Industrial compressed air filters ISO 8573.1
Get rid of mechanical impurities and oil from compressed air efficiently with our extensive filtration programme. Not only will you get better quality compressed air to suit more applications, but you will also extend the life of many compressor system components. If the above matters to you, please feel free to explore our filtration category properly. You will find Omega Air filters, B-Air filters or NGF and Mark filters. We also offer new filter, catalyst and adsorption inserts for all filters. More about the whole program and filtering principles in the sequel.
#ShowMore#
Why is it necessary to filter compressed air?
The compressed air produced by your compressor - whether piston or screw - is not of good quality without post-treatment and is not suitable for many applications. This is because the compressor inlet filter only captures part of the mechanical impurities. However, they are not the only problem that degrades the quality of the produced air.
What does the produced compressed air contain?
- mechanical impurities
- humidity
- oil vapours (if it is an oil compressor)
This harmful triple combination is causing great trouble for any equipment that is connected to the compressor. Pneumatic tools - over time, they lose power and increase consumption, corrode inside, destroy seals, clog holes, become stuck and negatively affect the quality of work. Its lifetime is shortened many times over. Imagine what untreated compressed air can do to the individual components of a large automated line full of valves, cylinders and variously controlled moving parts. Shutting down a line for servicing can cost a company hundreds of thousands.
Compressed air quality
Compressed air quality is described in standardsiSO 8573-1 with seven classes, from 0 to 6. This guideline is crucial for every operator, as it sets out the exact quality requirements for different applications. Each class has a prescribed maximum content of solids, water and oil. We go into detail about this issue in this article, which will give you advice on how to choose water filters to connect behind your compressor: How to filter compressed air
In addition to the filters themselves, you may also be interested in:
- filter inserts for activated carbon filters
- filter inserts for microfilters
- filter inserts for dust filters
- catalytic filter inserts
- adsorption filter inserts
- air filter cartridge contamination indicators
Filters according to the quality class of solid impurities:
- quality class 1
- quality class 2
- quality class 3
- quality class 4
- quality class 5
- quality class 6
- quality class 7
Industrial filters divided according to condensate discharge:
-
Omega air filters; 16 to 64 bar
-
High pressure filters CHP/IHP; carbon and stainless steel up to 400 bar
-
NGF air filtration; including clogging indication
-
Stainless steel process filters; air and gas distribution
-
Sterile stainless steel filters; SFS and SPF filtration
-
Vacuum filters; filtration for vacuum
-
PPA filter system; for painting equipment
-
B-AIR filtration; for breathable air
-
Filters in AFS design; silicone-free filtration
-
Accessories for filters; inserts, indications,...
.png)
Product sorting
List of products
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-25 and AAFM-30 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement cyclone cartridge for liquid water filtration AAFC-198V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFM pre-filter in 3/8" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Hankison filter cartridge for SF series air filter type F03. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
AAFC 2" cyclone separator with a flow rate of 16,667 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Replacement cyclone cartridge for liquid water filtration AAFC-510V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-120. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-25 and AAFR-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Simple mechanical device for checking the condition of the filter cartridge. Contributes to reducing power consumption by alerting to high pressure gradients. If the filter...
AAFC cyclone separator in 3/4" design with a flow rate of 2,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-335. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-120. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Set for connecting 2 filters of the OMEGA AIR AAF series in sizes 25 - 30. Fast and elegant installation that everyone can handle.
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and an...
Set for connecting 2 OMEGA AIR AAF series filters in sizes 35-120. Fast and elegant installation that everyone can handle.
Set for connecting 2 filters of the OMEGA AIR AAF series in sizes 198 - 780. Fast and elegant installation that everyone can handle.
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-780 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
The HFS filter insert removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Working pressure...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-335. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-780. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F02 with 1/4" female thread connection. The filter is equipped with a clogging indicator and an...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-510. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-25 and AAFP-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-25 and AAFA-30. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-335 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Hankison filter cartridge for SF series air filter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Hankison filter cartridge for SF series air filter type F04. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of the...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...