Connectors and angles, Page 3
Product sorting
List of products
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 45° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 90° angle.
Groove connector for connecting profiles of the BH 45-10 and BH 50-10 series at a 30° angle.
Groove connector for connecting BH 45-10 and BH 50-10 series profiles at a 60° angle.
Groove connector for connecting BH 20-6 series profiles at a 45° angle.
Slot connector for connecting BH 20-6 series profiles at a 90° angle.
Groove connector for joining BH 20-6 series profiles at a 30° angle.
Groove connector for joining BH 20-6 series profiles at a 60° angle.
Connector for perpendicular joining of BH 45-10 series profiles with a 45x90 cut.
Connecting plate for creating a perpendicular joint between profiles with a 50x100 section.
Groove connector for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Connector for perpendicular joining of BH 45-10 series profiles with a 45x45 section.
Coupling for creating a pivoting joint between profiles with a 45x45 section, with the possibility of locking using a lever.
Universal angle bracket with a 90° angle and dimensions of 43x88 for connecting profiles from the outside using M8x16 screws.
Connecting latch for direct connection of profiles series BH 40-10, BH 45-10 and BH 50-10 at any angle in the horizontal direction.
Joining latch for direct connection of profiles of the BH 40-10, BH 45-10 and BH 50-10 series at any angle in the vertical direction.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Vertical connecting latch for perpendicular connection of profiles in the BH 40-10, BH 45-10 and BH 50-10 series.
Coupling for creating a swivel joint between BH 45-10 series profiles with a 45x45 section.
Universal angle bracket with a 90° angle and dimensions of 95x88 for connecting profiles from the outside using M8x16 screws.
Connector for creating a swivel joint between profiles with a 40x80 section.
Plastic cap for 18x18 angle bracket in grey.
Coupling for creating a pivoting joint between 45x90 section profiles with the possibility of locking by tightening the Allen screw.
Groove connector for direct connection of profiles from the BH 45-10 and BH 50-10 series.
Plastic cap for 38x36 angle bracket in grey.
Angle bracket for groove for connecting profiles of the BH 40-10, BH 45-10 and BH 50-10 series at a 90° angle.
Connecting plate for perpendicular joining of profiles with an edge width of 40 or 80 mm.
Coupling for creating a pivoting joint between BH 40-10 series profiles with a 40x40 section.
Small angle bracket with a 90° angle and dimensions of 20x20 for joining profiles from the outside using M5 countersunk screws.
Connecting plate for creating a perpendicular joint between profiles with a 40x40 section.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.