Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    EUR
    Language
    English
    Home / Compressors / Šroubové a pístové kompresory s příkonem 11 kW

    Šroubové a pístové kompresory s příkonem 11 kW

    Chystáte se pořídit kompresor vhodný pro vysoký nebo stálý odběr stlačeného vzduchu? V tom případě je vhodné porozhlédnout se po šroubových a pístových kompresorech s příkonem 11 kW. Jde o precizní stroje s vysokým objemem tlakové nádoby a často v kombinaci rovnou s kondenzační sušičkou vzduchu. Konstruovány pro podávání těch nejlepších výkonů při výrobě stlačeného vzduchu v dílnách a průmyslu.

    9 items total

    List of products

    abac MAXI 3quarter left tank dryer copia
    Tip Low noise + Free gift
    FREEFREE
    Screw compressor SPN-11/10DX-500 Input power 11 kW, displacement 1,416 l/min, pressure 10 bar, air receiver 500 l, voltage 400/50 V/Hz YD + dryer
    Stock (1 pcs)
    €7 803,30 excl. VAT
    €9 441,99 / pcs

    Comfortable screw compressor with an input of 11 kW in a practical design with pressure vessel and condensation dryer to save installation space. The maximum outlet pressure is...

    Code: SPN-11/10DX-500
    scr 11 10 pm2
    Tip Low noise + Free gift
    FREEFREE
    SCR-11/10PM2 screw compressor motor power input 11 kW, delivered pressure 10 bar, volumetric flow rate 90 Nm³/h
    Stock (2 pcs)
    €6 138,28 excl. VAT
    €7 427,32 / pcs

    Innovative and economical small screw compressor SCR-11/10PM2 for saving up to 50% of electricity. Maximum output 1 500 l/min at 10 bar. Continuous speed control by frequency...

    Code: SCR-11/10PM2
    abac MAXI 3quarter left notank copia
    Low noise + Free gift
    FREEFREE
    Screw compressor SPN-11/10
    Stock (1 pcs)
    €5 911,60 excl. VAT
    €7 153,04 / pcs

    Separate screw compressor with an input of 11 kW without pressure vessel. The maximum outlet pressure is 10 bar at an air flow of 1,416 l/min. Infologic2 electronic unit with...

    Code: SPN-11/10
    ath 11 20 btx
    FREEFREE
    Abac Tech ATH-11/20-BTX Compressor Power input 11 kW, suction capacity 1392 l/min, pressure 20 bar, voltage 400/50 V/Hz
    up to 14 days
    €0,04 excl. VAT
    €0,05 / pcs

    Compressor on a base frame with an output pressure of 20 bar designed for continuous operation in industry. Oil-lubricated design with a motor input of 11 kW.

    Code: ATH-11/20-BTX
    ath 11 30 btx
    FREEFREE
    Abac Tech ATH-11/30-BTX Compressor power input 11 kW, suction capacity 996 l/min, pressure 30 bar, voltage 400/50 V/Hz
    up to 14 days
    €0,04 excl. VAT
    €0,05 / pcs

    Base frame compressor with an output pressure of 30 bar designed for continuous operation in industrial applications. Oil-lubricated design with a motor input of 11 kW.

    Code: ATH-11/30-BTX
    ca1 2x5 5 500ft (1)
    Tip + Free gift
    FREEFREE €7 126,45 –5 %
    Cast iron piston compressors CA1-2x5.5-500FT power input 11 kW, suction capacity 1,399 l/min, pressure 11 bar, air receiver 500 l, voltage 400/50 V/Hz
    up to 20 days
    €5 595,15 excl. VAT
    €6 770,13 / pcs

    Low-speed V-belt reciprocating compressor with 11 bar output pressure for use in workshop and industrial applications. Stationary oil-lubricated design with two compressor units...

    Code: CA1-2X5-5-500FT
    b60 2x5 5 500ft
    + Free gift
    FREEFREE €5 964,84 –5 %
    Tandem compressor B60-2x5.5-500FT power input 11 kW, suction capacity 1,654 l/min, pressure 11 bar, air receiver 500 l, voltage 400/50 V/Hz
    up to 20 days
    €4 683,13 excl. VAT
    €5 666,59 / pcs

    Workshop piston compressor with V-belts with an output pressure of 11 bar designed for use in craft and professional applications. Stationary oil-lubricated design with two...

    Code: B60-2X5-5-500FT
    b60 2x5 5 900ft
    + Free gift
    FREEFREE €7 296,17 –5 %
    Tandem compressor B60-2x5.5-900FT Input power 11 kW, suction capacity 1,654 l/min, pressure 11 bar, air receiver 900 l, voltage 400/50 V/Hz
    up to 20 days
    €5 728,40 excl. VAT
    €6 931,36 / pcs

    Workshop piston compressor with V-belts with an output pressure of 11 bar designed for use in craft and professional applications. Stationary oil-lubricated design with two...

    Code: B60-2X5-5-900FT
    b70 2x5 5 500ft
    + Free gift
    FREEFREE €7 157,55 –5 %
    Tandem compressor B70-2x5.5-500FT input power 11 kW, suction capacity 2,046 l/min, pressure 11 bar, air receiver 500 l, voltage 400/50 V/Hz
    up to 20 days
    €5 619,57 excl. VAT
    €6 799,68 / pcs

    Workshop piston compressor with V-belts with an output pressure of 11 bar designed for use in craft and professional applications. Stationary oil-lubricated design with two...

    Code: B70-2X5-5-500FT

    Listing controls

    9 items total