Compressed Air Moisture Removal Air Dryers OMEGA AIR, Page 3
-
RDP condensation dryers; pressure dew point +3 °C
-
Condensation dryers WDF; dew point +3°C with filters
-
HDI air dryers; pressure dew point +4°C
-
RDL condensing dryers; pressure dew point +5°C
-
Cool air dryers; pressure dew point +5°C
-
MDX air dryers; pressure dew point +3°C
-
ADRY air dryers; smaller adsorption -40°C
-
BDRY air dryers; large adsorption -40°C
-
MADRY air dryers; membrane -40°C
-
Activated carbon columns; activated carbon separation
.jpg)
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
.jpg)
Product sorting
List of products
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G 1" male thread....
The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...
Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 20 m³/hr (333 l/min) and connection via external thread G3/8"....
The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...
The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...
MADRY-12 membrane dryer with compressed air flow up to 12 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-18 membrane dryer with compressed air flow up to 18 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-24 membrane dryer with compressed air flow up to 24 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-3 membrane dryer with compressed air flow up to 3 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-6 membrane dryer with compressed air flow up to 6 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
MADRY-9 membrane dryer with compressed air flow up to 9 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...
Service KIT after 2 years of operation of the Omega Air adsorption dryer FDRY-3000 series includes a replacement microfilter cartridge, dust filter and replacement silencers,...
Service KIT after 4 years of operation of the adsorption dryer Omega Air BDRY-250 series includes a replacement microfilter cartridge, dust filter and replacement silencers, a...
Service KIT after one year of operation Omega Air FDRY-6500-1R series adsorption dryer includes a replacement dust filter microfilter cartridge and replacement silencers for...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
MADRY-32 membrane dryer with compressed air flow up to 32 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G 3/4" male thread. The...
Replacement diaphragm for MADRY-12M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
Replacement diaphragm for MADRY-3M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
Replacement diaphragm for MADRY-24M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
Replacement diaphragm for MADRY-18M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
Replacement diaphragm for MADRY-32M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.
Dry separation TAC-400 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 6 833 l/min at a maximum pressure...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-800 designed for permanent separation of water vapour from compressed air with a flow rate of up to 10 058 l/min at a maximum pressure of 16 bar and...
The FDRY-1200 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,600 l/min at a maximum pressure of 16 bar...
The FDRY-2000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 26,000 l/min at a maximum pressure of 16 bar...
The FDRY-2500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 32,500 l/min at a maximum pressure of 16 bar...
The FDRY-3000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 39,000 l/min at a maximum pressure of 16 bar...
The FDRY-3750 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 48,750 l/min at a maximum pressure of 16 bar...
The FDRY-5000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 65,000 l/min at a maximum pressure of 16 bar...
The FDRY-6500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 84,500 l/min at a maximum pressure of 16 bar...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G 1/2"....
Cable for analogue output of adsorption dryers - BDRY-AO. B-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed Cycle Mode -...
A-DRY adsorption dryers are equipped with the new generation ADC 4.0 electronic control unit. This version of the controller is easy to use and offers many innovative features....
Dew point sensor including cable - for air saving regeneration - BDRY-OS. B-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
The TAC-1000 dry separator is designed to separate oil vapour from compressed air using activated carbon from the compressor up to a flow rate of 16,667 l/min at a maximum...
The TAC-200 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
Dry separation TAC-250 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...