Filtration, regulation and treatment of compressed air, Page 13
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-25 and AAFA-30. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
Adsorption dryer BDRY-300 designed for permanent separation of water vapour from compressed air with a flow rate of up to 4,183 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-110 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 433 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-600 designed for continuous separation of water vapour from compressed air with a flow rate of up to 7,708 l/min at a maximum pressure of 16 bar and...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
MVAC medical vacuum filter with G1 1/2" connection thread designed for effective removal of solid and liquid impurities and bacteria from the suction side of vacuum pumps....
Service KIT 2 years of operation adsorption dryer Omega Air series ADRY-36 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer, check...
AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
AAFM 1 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
Magnetic differential pressure gauge VPG60 for indication of filter cartridge blockage in vacuum systems with LED signaling. Designed for mounting from the top of the filters...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
AAFR dust filter in 1 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from compressed...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...
Size 4 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Air pre-filter 0,3 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
Cyclone separator HFC-010 with 3/4" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar,...
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-78. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Filter cartridge for HFM filter to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm. Working...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2160 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Replacement filter cartridge 5 um for basic filter of FUTURA series - F34-F, F10-F. The filter insert can be easily replaced.
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-198. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement container for FUTURA FA filters in size 1 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...