Filtration, regulation and treatment of compressed air, Page 14
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
CHP4A activated carbon filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
CHP4P basic filter with G1 1/4" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum...
Dust filter CHP4R with G1 1/4" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...
Filter with sterile HFPA liner with G2" connection thread for use in high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50 bar,...
The CHP4S microfilter with G1 1/4" connection thread is designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.01 um....
CHP4M pre-filter with G1 1/4" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.1 um. Maximum...
HFPI pre-filter with G2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 20 um. Maximum working pressure up to 50 bar, maximum...
CHP2B sintered coarse filter with G1 1/2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 15 um....
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Electronic timed condensate drain for compressed air systems up to 150 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Electronic stainless steel timed condensate drain from compressed air system up to 16 bar, working on time switching valve. External mounting on the filter body with 1/2"...
Electronic timed condensate drain for compressed air systems up to 25 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
High-flow silencer with external pipe thread G 1/8" designed especially for compressed air expansion during regeneration and ventilation of production columns of adsorption...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 1,900 m³/h (31,666 l/min) and connection via external thread...
Replacement filter cartridge 5 um for basic filter of FUTURA series - F14-F and F38-F. The filter insert can be easily replaced.
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Regulator with inlet up to 25 bar 1" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate of...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 1,500 m³/hour (25,000 l/min) and connection via external...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 300 m³/hour (5,000 l/min) and connection via external thread...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 380 m³/h (6,333 l/min) and connection via external thread G1...
The B-AIR breathable air filter with G1/2" connection thread is designed for a flawless supply of breathable atmosphere. The microfilter removes impurities down to 0.01 um....
Cyclone separator CS with flange connection DN80. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Cyclone separator CS with flange connection DN125. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Cyclone separator SFH with flange connection DN100. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 180 m³/hour (3,000 l/min) and connection via external thread...
Replacement sintered bronze filter cartridge 15 µm for OMEGA AIR filter AAFB-198. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN80 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN80...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
The filters are used to remove mechanical impurities from compressed air up to 3 um according to ISO 8573-1 class 6. Connection by flange with DN80 clearance. Designed for flow...
Cyclone separator CHP2 with 3/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G 1" male thread....
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 10 bar up to a flow rate...
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Replacement cyclone cartridge for liquid water filtration AAFC-198V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Cyclone separator CHP2 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...