Filtration, regulation and treatment of compressed air, Page 13
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 260 m³/hr from the compressor at a 3°C dew point enables use in...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 300 m³/hr from the compressor at a 3°C dew point enables use in...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 225 m³/hr from the compressor at a 3°C dew point allows use in...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-35 and AAFB-35 filters. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement cartridge WOS-8A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
Replacement cartridge WOS-8P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 12 m³/hr from the compressor at a 3°C dew point enables use in...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...
Complete filter system for breathable air B-AIR PLUS. The system includes a microfilter to remove impurities down to 0.01 um, an activated carbon filter to eliminate oil...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-35 and AAFS-60 microfilters. Recommended replacement 12 months or every 4,000 MH and...
40 micron filter insert for compressed air treatment units in Combibloc design from EWO.
Compressed air microfilter 0,01 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 300 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Connection set of FUTURA air handling units with wall bracket size 4. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Mounting bracket with size 4 lock nut for FUTURA air handling units. Installation for pressure regulator or pressure regulator with filter. Simple attachment with a bracket....
High-flow silencer with external pipe thread G 2" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN150 clearance....
Standard connection set for FUTURA size 4 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Electronic timed condensate drain for compressed air systems up to 50 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-198. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
MADRY-32 membrane dryer with compressed air flow up to 32 m³/hr up to 12 bar. Including 2 filters through the dryer and filter cartridge clogging indication. Designed to supply...
AAFC 2" cyclone separator with a flow rate of 25,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
High flow silencer with external pipe thread G 1/4" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
High-flow silencer with external pipe thread G 1/8" designed especially for compressed air expansion during regeneration and ventilation of production columns of adsorption...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
High-flow silencer with external pipe thread G 3/8" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 100 m³/hr (1,666 l/min) and connection via a G 1" male thread....
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...
Dust filter AAFR in 1/4" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Filter cartridge for medical vacuum filter MVAC-0006. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 60 l/min.
Filter cartridge for medical vacuum filter MVAC-0016. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 36 l/min.
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with G 1" inlet and 0,5 - 6 Bar outlet pressure control. Maximum inlet pressure 40...
Cyclone separator CSSS with flange connection DN200. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Cyclone separator CSSS with flange connection DN150. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
High flow silencer with external pipe thread G 3/4" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 108 m³/hr from the compressor at a 3°C dew point enables use in...
Regulator with inlet up to 25 bar 3/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from compressed...