Filtration, regulation and treatment of compressed air, Page 3
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Fixing angle for air treatment units A2R-12, A2S-12. Attachment by means of a lock nut on the pressure regulator.
AAFC 2" cyclone separator with a flow rate of 16,667 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters size 3/4"-1".
Mounting angle for air handling units A2R-38, A2S-38. Attachment by means of a lock nut on the pressure regulator.
AAFC cyclone separator in 3/4" design with a flow rate of 2,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters in 1/4" size.
Air treatment units A1. Simple compressed air control with 1" AR pressure regulators with 8,000 l/min air flow. Included in the delivery is a pressure gauge and fixing angle.
Replacement diaphragm for A2 - A2MR-12 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Test papers for water-oil separators containing 20 pieces of paper.
Size 2 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Electronic timed condensate drain for compressed air systems up to 50 bar, operating on a time switching valve. External mounting on the filter body with 1/2" thread. Simple...
High-flow silencer with external pipe thread G 1" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
Air treatment units A1. Simple compressed air regulation with AR pressure regulators in 3/8" design with air flow of 2 500Air pressure regulator AR14 l/min. Included in the...
Replacement container for METAL WORK compact filters size 1/8" - 1/4".
Shut-off valve in 3/8" design with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....
Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 2,500 l/min in 3/8" size. Application mainly in industry, laboratory,...
Replacement filter insert 20 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.
Replacement filter insert 5 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.
MDM40 - basic version. Magnetic differential pressure gauges for displaying the orientation state of the filter cartridge. Fitted with dial with indicative scale and green/red...
Mounting angle for air handling units A2F-38, A2L-38. Attachment of filters and lubricator of A2F units to the unit body.
Metal grease nipples up to 18 bar with a flow rate of 16,000 l/min in size 3 with 1" thread for effective oil mist doses for lubricating pneumatic tools or drives on production...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
Replacement container for METAL WORK compact grease guns size 1/8" - 1/4".
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 3/8" version can filter 1,500 l/min of air compressed to a...
Standard connection set for FUTURA size 2 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Replacement container for filter unit A2 - A2NF-12. Simple container change with lock on the following units: A2F-12, A2S-12, A2U-12.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators size 3/8"-1/2".
Air treatment units A1. Simple air filtration at 5 um. Filter design 3/8" with air flow 1 700 l/min. Semi-automatic condensate discharge in the flask.
Cyclone separator HFC-007 with 1/2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar,...
Compressed air treatment units in metal design up to 18 bar. Comprehensive treatment in one 1/4" device with flow rates up to 800 l/min. All the benefits of separate parts....
Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement cyclone cartridge for liquid water filtration AAFC-1500V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Replacement container for lubrication unit A2 - A2NL-38. Simple container change with lock on the following units: A2L-38, A2U-38.
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/4" version can filter 750 l/min of air compressed to a...
The air handling unit size 1 air handling unit - B2 allows air sampling with certain parameters inside the modular series. Tapping outlet via 4 x 1/8" thread. Mthe possibility...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. Lubricator design 1/2" with air...
Basic AFP filters according to ISO 8573.1 with a filtration capacity of 3 um and an efficiency of 99.9%. FPRO filters are used to remove the largest mechanical impurities from...
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.1 to 3 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....