Filtration, regulation and treatment of compressed air, Page 5
Product sorting
List of products
Connection set of FUTURA air handling units with wall bracket size 2. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Dust filter AAFR in 1/2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-150 to ADRY-200 includes a replacement microfilter cartridge, dust filter and...
Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Fixing angle for air handling units A2F-12, A2L-12. Attachment of filters and lubricator of A2F units to the unit body.
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
Measuring chamber for dew point sensor - for regeneration air saving - ADRY-MK. A-DRY dryers can operate in two operating modes depending on the settings of the control unit....
Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F04 with 1/2" female thread connection. The filter is equipped with a clogging...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases. Inlet pressure up to 200 bar. Pressure regulation 0,5 - 50 bar. Operating...
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 1/2" thread. Application mainly in industry, laboratory, measuring and control...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Adsorption filter with activated carbon AAFA2 in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 3/8" thread. Application mainly in industry, laboratory, measuring and control...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Replacement cartridge WOS-4A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
Replacement cartridge WOS-4P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
The TACM-105 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 1,950 l/min at a maximum...
AAFR dust filter in 2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-78 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFM 1 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
Replacement cartridge WOS-8P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
High-flow silencer with external pipe thread G 1 1/2" designed especially for compressed air expansion during regeneration and ventilation of production columns of adsorption...
Replacement cartridge WOSM-1AP for water-oil separators. Combined filtration with activated carbon and PP cartridge. Residual oil less than 20 ppm. The maximum flow rate is 1000...
Microfilter in metal design up to 18 bar with 0.01 µm liner, flow rate 4 300 l/min in size 2 with 3/8" thread atdesigned for very gentle removal of solid dirt, water and oil...
Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...
Compressed air treatment unit in metal design up to 18 bar. Lubricator in 1/4" size with a flow rate of up to 1100 l/min for compressed air lubrication of e.g. pneumatic tools....
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 4,600 l/min in size 3 with 1" thread. Regulation range 0 -...
Metal grease gun up to 18 bar with a flow rate of 1,700 l/min in size 1 with 1/4" thread for efficient oil mist doses for lubricating pneumatic tools or drives on production...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 11,000 l/min. Connection 1" pipe thread. Possibility to change the...
Replacement container for FUTURA filters in size 1 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...
Water oil FOD separatorsDischarging condensate directly into the sewer is illegal and the condensate must be disposed of as oilWater oil FOD separators separate water and...