Compressed air hose, Page 21
-
Plastic hoses; PUJ - PA - PTF - PE
-
Pressure hoses with braid; air - oil - gases
-
Suction and transport hoses; reinforced hoses
-
Spiral hoses; for all tools
-
Eschbach fire hoses; flat hoses for firefighters
-
Connecting hoses; for pressure assemblies
-
Hose clamps; various types and designs
-
Winding drums; open and closed construction
-
V-belts; smooth, serrated, multiple
-
Hose accessories; pliers, holders, reels...
Product sorting
List of products
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 9 mm wide band for hose range 110-130 mm. Manufactured according to DIN 3016. With house and tightening...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 9 mm band width for hoses with a range of 140-160 mm. Manufactured according to...
Worm hose clamps in material finish W2 - stainless steel band, chrome-plated house and screw with 12 mm band width for hoses in the range 60-80 mm. Manufactured according to DIN...
EGW deformation hose coupling with a range of 17.1-19.3 mm and a tape width of 9.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Screw hose clamps in material finish W4 - stainless steel AISI 304 with 12 mm wide band for hoses with a range of 32-50 mm. Manufactured according to DIN 3016. With house and...
Hose clamp SW1 - 27mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...
FoxiPro PUR L suction hose with a diameter of 60 mm made of abrasion-resistant polyester-polyurethane foil with a thickness of 1.45 mm and a steel wire spiral. Designed for...
PW4 239mm strength hose clamp with tightening screw located on the hinge bolt. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
Hose clamp SW1 - 21mm fitted with two tightening screws on the hose clamp. Supplied in W1 version, made of galvanized steel. Designed for coupling very soft rubber hoses,...
The hose is designed for hydraulic oils, antifreeze, water, hot oils and compressed air in 26,2/19 mm grey. Special pressure hoses for easy assembly without the need for hose...
Mounting bracket KW with a diameter of 32 mm and a tape width of 20 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...
Mounting bracket KW with a diameter of 35 mm and a tape width of 20 mm. Made of W1 material - white galvanized steel compliant with RoHS directive, rubber insert resistant to...
High-quality blue spiral hose 10/6.5 mm with extreme spiral return capability of 10 m and long service life, including end quick couplers. Made of branded granular elastollan...
EGW deformation hose coupling with a range of 14.6-16.8 mm and a tape width of 8.2 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Hose clamp designed for hose diameters 25-40 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
PW4 28mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...
EGW deformation hose coupling with a range of 4.7-5.7 mm and a tape width of 5.5 mm with one eyelet. Made of W4 - stainless steel and liner to prevent damage to the hose....
Inexpensive plastic spiral hose 10 / 6.5 mm made of polyurethane, 3 m long, fitted with quick couplings in a blue finish. The small diameter of the spiral saves space....
Hose clamp designed for hose diameters 60-145 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses in the range of 40-60 mm. Manufactured according to DIN 3016. With house and tightening...
The inner length is 1 400 mm and the calculated length is 1 430 mm. The belt is designed for applications on compressors, pumps, aggregates, alternators, saws and various...
FoxiBase PUR SL-SE0.4 suction hose with a diameter of 300 mm made of 0.4 mm thick abrasion-resistant polyester-polyurethane film with a steel wire spiral. Transparent body with...
Deformation hose clamp EWS4 range 13,0 to 15,0 mm with one eyelet and 4 mm tape width. Allows the connection of hoses with small diameters using deformation clamps. Made of W4 -...
Hose clamp PW1 51 mm with tightening screw located on the hose clamp. Made of galvanized steel. Suitable for use on all types of pressure and suction hoses in industry with...
Worm hose clamps in material finish W1 - galvanized steel with 9 mm wide band for hoses with a range of 60-80 mm. Manufactured according to DIN 3016. With house and tightening...
Screw hose clamps in material finish W1 - galvanized steel with 12 mm wide band for hoses with a range of 180-200 mm. Manufactured according to DIN 3016. With house and...
SW4 55mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
Fused hoses with reinforced end caps for connecting the pressure vessel to the compressor and air line. Maximum 20 bar. Threaded version 1 1/4" in length 2000 mm and straight ends.
SW4 100mm strength hose clamp fitted with two tightening screws on a hinge bolt. Available in W4 version, made of stainless steel 1.4301. Designed for coupling very soft rubber...
PW4 121mm strength hose clamp with tightening screw located on the hose clamp. Made of AISI 304 stainless steel. Suitable for use on all types of pressure and suction hoses in...