BH profiles and accessories, Page 5
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Plastic handle cover 084.505.001, orange colour.
Horizontal latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Vertical orientation connecting latch for perpendicular connection of BH 30-8 and IM 40-8 series profiles.
Square cover cap for corner connector 084.310.022 made of black polyamide.
Square cap for corner joint 084.310.022 made of grey polyamide.
Universal angle bracket with a 90° angle and dimensions of 37x78 for joining profiles from the outside using M8x20 screws.
Square nut M8 for BH 30-8 and IM 40-8 slots, with guide.
A sliding latch with a spring for closing doors, made of polyamide.
Universal angle bracket with a 90° angle and dimensions of 27x59 for connecting profiles from the outside using M6x16 screws.
Angle bracket for groove for connecting profiles of BH 30-8 and IM 40-8 series at a 90° angle.
PVC seal for profile groove to attach 1 mm thick panels into 8 mm wide grooves.
Short nut M8 for grooves BH 40-10, BH 45-10 and BH 50-10.
Aluminium end cap for channel profile 45x45.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Short nut M6 for BH 40-10, BH 45-10 and BH 50-10 slots, made of stainless steel.
Block for fixing a panel with a thickness of 1 to 8 mm to the outer edge of the profile.
Handle made of black polyamide, dimensions 146x44 mm.
Square nut M4 for BH 30-8 and IM 40-8 slots, with guide.
Square nut M5 for BH 30-8 and IM 40-8 grooves, with guide.
Universal angle bracket with a 90° angle and dimensions of 43x86 for connecting profiles from the outside using M8x20 screws.
Plastic end cap for 43x43 angle bracket in black.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x35 made of galvanised steel
Open polyamide handle with dimensions 130x48 mm, grey colour.
Short nut M5 for BH 30-8 slot, made of stainless steel.
Universal angle bracket with a 90° angle and dimensions of 59x59 for connecting profiles from the outside using M6x16 screws.
Plastic cap for semi-circular profiles 30x30 in grey
Rubber base pad insert with a diameter of 80 mm.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Round cap for corner joint 084.310.013 made of black polyamide.
Round cap for corner connector 084.310.013 made of grey polyamide.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x30 made of galvanised steel
Plastic cap for 43x86 angle bracket in black.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x40 made of galvanised steel
Base with a diameter of 40 mm and an M8 connection thread. Base load capacity of 900 kg.
Angled solid handle made of grey polyamide, measuring 128x43 mm.
Cover strip for closing channel profile 80x80.