BH profiles and accessories, Page 7
-
BH 20-6 profiles; 6 mm wide groove
-
BH 30-8 profiles; 8 mm wide groove
-
BH 40-10 profiles; 10 mm wide groove
-
BH 45-10 profiles; 10 mm wide groove
-
BH 50-10 profiles; 10 mm wide groove
-
Other profiles
-
Profile blanks
-
Screws and nuts
-
Connectors and angles
-
Bases and casters
-
Fencing accessories
-
Door accessories
-
Profile machining
Product sorting
List of products
Set of 2 brackets for gas springs with fixing holes with diameters D=6 mm.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Screw for grooves BH 40-10, BH 45-10 and BH 50-10 with dimension M8x25 made of stainless steel
Floor bracket for mounting on profiles with a width of 30 mm.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Flange for attaching bases and castors to 50x50 profiles with M12 thread.
Flange for attaching bases and castors to 50x50 profiles with M16 thread.
Flange for attaching bases and castors to 50x50 profiles with M10 thread.
Corner connector for connecting 3 profiles of the AC 30-6 or BH 30-8 series with a 30x30 section at a 90° angle.
Gas spring with 110 mm stroke and 300 N force.
Slot connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 90° angle.
Aluminium hinge with dimensions 81x80, for 45/45 profiles.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Aluminium hinge for opposite mounting of profiles, with dimensions 81x45, for profiles 30/30.
Tubular handle with a length of 200 mm made from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in grey.
Plastic end cap for 100x100 profiles in grey
Multi-purpose profile for defining 2 profiles with a BH 30-8 series groove.
Plastic hinge made of polyamide with dimensions 50x70, for profiles 45/45.
Two-part base for mounting on profiles with sections 40x80 and 40x120.
Swivel castor with a diameter of 60 mm for mounting using a 60x60 flange.
Slot connector for joining BH 30-8, BH 40-10 and IM 40-8 series profiles at a 45° angle.
Groove connector for joining profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 30° angle.
Groove connector for connecting profiles of the BH 30-8, BH 40-10 and IM 40-8 series at a 60° angle.
Plastic cap for 43x43 angle bracket in grey.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
The 60x60 aluminium profile allows for the creation of channels with cables.
Joining plate for creating a perpendicular connection between profiles with a 40x80 section.
Aluminium hinge with dimensions 55x42, for profile 30/panel.
Square nut M6 for BH 30-8 and IM 40-8 slots, equipped with guide and perpendicularly positioned spring.
Fixed castor with a diameter of 100 mm for mounting using a 60x60 flange.
Angle bracket for joining profiles with a 40x40 section at a 45° angle.
Plastic seal for installing panels with a thickness of 3-6 mm into the groove of profiles series BH 40-10, BH 45-10 and BH 50-10.