IM profiles and accessories, Page 3
Bestsellers
List of products
The 45x45 aluminium profile allows for the creation of channels with cables.
Coupling for creating a pivoting joint between profiles of the AC 30-6 or IM 30-6 series with a 30x30 section.
Small 90° angle bracket with dimensions 40x40 for joining profiles from the outside using M8 countersunk screws.
Base with a diameter of 80 mm and an M10 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M12 connection thread. Base load capacity of 1000 kg.
Base with a diameter of 80 mm and an M16 connection thread. Base load capacity of 1000 kg.
Tubular handle with a length of 200 mm, manufactured from a combination of a 15 mm diameter aluminium tube and polyamide connecting parts in black.
Adjustable foot 40x100 mm with M8 thread
Aluminium hinge with dimensions 55x42, for profile 30/panel.
The 80x80 aluminium profile allows for the creation of cable channels.
Door stop with dimensions 56x30 equipped with a magnet.
Set of 2 brackets for gas springs with fixing holes with diameters D=8 mm.
Rounded plastic end cap made of softened PVC for closing the groove of AC 45-8 and IM 40-8 series profiles in black.
Clamp for attaching glass panels with a thickness of 2 to 10 mm.
Tube for creating a handle, diameter D=32 mm, made of aluminium.
Aluminium hinge with dimensions 50x50, for profiles 30/30, 32/32.
Aluminium drill bit with a diameter of D=7.5 mm.
Base with a diameter of 50 mm and M10 connection thread. Base load capacity of 900 kg.
Aluminium hinge with dimensions 100.5x81, for 40/40 profiles.
Square base for mounting on 80x80 section profiles.
Bracket for mounting into a corner joint using M8x40 screws and for attaching bases with M16 threads.
Flexible handle with dimensions of 100x43 mm, primarily designed for sliding doors.
Gas spring with 110 mm stroke and 100 N force.
Gas spring with 110 mm stroke and 150 N force.
Gas spring with 110 mm stroke and 200 N force.
Gas spring with 110 mm stroke and 300 N force.
Gas spring with 110 mm stroke and 50 N force.
Gas spring with 142 mm stroke and 100 N force.
Gas spring with 142 mm stroke and 200 N force.
Gas spring with a stroke of 142 mm and a force of 300 N.
Gas spring with a stroke of 200 mm and a force of 250 N.
Gas spring with a stroke of 200 mm and a force of 350 N.
Limit switch for position detection with 2 contacts (1xNC and 1xNO).
Step drill with diameters D=9 mm and D=13.5 mm.
Swivel castor with a diameter of 100 mm for mounting using a 60x60 flange, equipped with a brake.
Swivel castor with a 60 mm diameter for mounting with a 60x60 flange, equipped with a brake.
Connector for creating a swivel joint between profiles with a 40x80 section.
Two-part base for mounting on profiles with sections 80x80, 80x120 and 80x160.
Black plastic end cap for closing the groove of BH 30-8 and IM 40-8 series profiles. When rotated, it can also be used as a groove seal for BH 30-8 series profiles when...
Square base for mounting on profiles with a 40x40 section.