Filtration, regulation and treatment of compressed air, Page 2
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Replacement filter cartridge CHPM-094V made of borosilicate microfibre is used for fine filtration to a purity of 0.1 um from compressed air. The maximum compressed air flow of...
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....
Replacement stainless steel filter cartridge IHPM-094V with borosilicate microfiber for pre-filtering of solid impurities of compressed air to the level of 0.1 um. The maximum...
Cyclone separator HFC-094 with 2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar, working...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
AAFR dust filter in 2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFA 2" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
PFS microfilter with G2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure is 16 bar, maximum...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
CHP2A activated carbon filter with G2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
CHP4A activated carbon filter with G2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
HFPA activated carbon filter with G2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50...
Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F12 with 2" internal thread connection. The filter is...
Adsorption dryer BDRY-1200 designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,050 l/min at a maximum pressure of 16 bar and...
AAFP basic filter in 2" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with 2" internal pipe threads. Designed to allow flow rates up to 13,317 l/min....
Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection with 2" internal pipe threads. Designed for flow rates up to 8233 l/min. Special...
CHP2P basic filter with G2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P basic filter with G2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
Basic stainless steel filter IHP1N5 with G2" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 5 um. Maximum...
Basic stainless steel filter IHP2N5 with G2" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 5 um. Maximum...
Basic stainless steel filter IHP4N5 with G2" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5 um....
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection with 2" internal pipe threads. Designed to allow flow rates up to 13,317...
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection with 2" internal pipe threads. Designed for flow rates up to 8233 l/min....
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 600 m³/hr from the compressor at a 3°C dew point enables use in...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 780 m³/hr from the compressor at a 3°C dew point enables use in...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 950 m³/hr from the compressor at a 3°C dew point enables use in...
The MDX1000 series condensation dryer with a maximum flow rate of 10,000 l/min and an inlet pressure of up to 14 bar is used to remove condensate and moisture from compressed...
The MDX1200 series condensation dryer with a maximum flow rate of 12,000 l/min and an inlet pressure of up to 14 bar is used to remove condensate and moisture from compressed...
The WDF-1200 condensing air dryer provides high-capacity compressed air drying with a flow rate of 1,200 m³/h (20,000 l/min) and a pressure dew point of +3 °C. Integrated...
The WDF-623 condensing air dryer effectively removes moisture from compressed air at a flow rate of 623 m³/h (10,383 l/min) and achieves a pressure dew point of +3 °C....
Cyclone separator CHP2 with 2" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...
Cyclone separator CHP4 with 2" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 400 bar, working...
HFC-150 cyclone separator with 2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar, working...
The TAC-800 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 12,833 l/min at a maximum...
Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection with 2" internal pipe threads. The design allows a flow rate of up to 13,317...
Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection with 2" internal pipe threads. The design allows a flow rate of up to 8233 l/min....
Dust filter CHP2R with G2" connection thread designed for effective removal of dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...