Filtration, regulation and treatment of compressed air, Page 7
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 thread 1". Regulation range 0 - 12 bar. Application mainly...
Metal grease nipples up to 18 bar with a flow rate of 16,000 l/min in size 3 with 1" thread for effective oil mist doses for lubricating pneumatic tools or drives on production...
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...
The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
Replacement filter cartridge PFI1 for filter with filtration capacity up to 1 um and working pressure 12 bar. Operating temperature up to 150°C. Made of stainless steel strainer.
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-780. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Air treatment units A1. Simple air filtration at 5 um. Filter design 3/8" with air flow 1 700 l/min. Semi-automatic condensate discharge in the flask.
Lubricator in metal design up to 18 bar with a flow rate of 16,000 l/min in size 3 with 3/4" thread designed for efficient oil mist doses for lubricating pneumatic tools or...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging indicator and an...
Shut-off valve in 3/8" design with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....
AAFM pre-filter in 3/8" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-780. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Lubricating grease gun in 1/2" design with compressed air flow up to 8,000 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 16 bar. Operating temperature -10°C to...
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-780 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1/2" with outlet pressure regulation 0,5 - 25 Bar. Maximum inlet...
Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 1" thread. Application mainly in industry, laboratory, measuring and control technology.
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-120 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging...
The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-2160. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-1000. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Microfilter in metal version up to 18 bar with 0,01 µm liner, flow rate 1 750 l/min in size 1 with 1/4" thread atdesigned for very gentle removal of solid dirt, water and oil...
AAFC cyclone separator in 3/8" design with a flow rate of 1,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Application...
AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
AAFA 2" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
AAFR dust filter in 2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-335 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Cyclone separator HFC-007 with 1/2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar,...
Condensation dryer for compressed air to a dew point of +3°C. Maximum input pressure is 14 bar with a flow rate of up to 100 m³/h (1,666 l/min) and connection via external...
AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Removes mechanical dirt up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by internal pipe threads 1/2". The design allows a flow rate of up to 1187 l/min....
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection with 3/4" internal pipe threads. The design allows a flow rate of up to 1867 l/min....
Dew point sensor including cable - for air saving regeneration - ADRY-OS. A-DRY dryers can operate in two operating modes depending on the settings of the control unit. Fixed...
Filter cartridge for HFR filter to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 1 μm. Working pressure...