Special offer, Page 44
Product sorting
List of products
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Pneumatic chisel hammer in practical case with 4 chisels, clamping spring, oil container and connection nipple.
Straight coupling with external thread G1 "with a diameter of 32 mm. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and...
Reducing coupling with 9 and 6 mm hose shank in POM plastic material resistant to petrol, diesel and oil. Simple fastener for attaching hoses in automation technology and...
Plastic T-coupling with 1/4" tapered male thread. Simple and quick assembly of plastic tubing with an outer diameter of 4 mm. Designed especially for automation, pneumatic...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
Plastic manometer with 100 mm diameter gauge with side connection via G1/2" thread for measuring vacuum and pressure with a range of -1 to 1.5 bar. Designed for pressure...
Hose clamp designed for hose diameters 25-45 mm with easy and quick assembly of the hose clamp thanks to the snap-on house. Stainless steel strip with 9 mm wide continuous...
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Hardened nuts for high tightening torques. For impact wrenches with 1/2" clamping square for 10 mm screws.
24 V DC solenoid coil for PUC-220 series solenoid valves. Maximum medium viscosity 50 cSt for temperatures - 10 °C and +80 °C. The delivery does not include the connector...
Cover nut G1/2" with 15,5 mm hole. Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed air...
BH 30-8 groove screw with dimensions M6x16, made of galvanised steel.
BH 30-8 groove screw with dimensions M6x12, made of galvanised steel.
The SGHX100 spray gun is a highly durable professional spray gun with APS technology, designed for priming and finishing in the automotive and furniture industries. It has a...
Ball valves for full flow water, lever operated up to 25 bar. Nickel-plated brass MS58 body, control lever in red. Sealing the shaft with a packing. Designed especially for...
Suction cup SF with diameter 16,5 mm in flat design. Made of 55°Sh nitrile. Designed for the transport of flat objects where a parallel force to the surface of the object...
Hose barb fitting with 9 - G3/8" male thread. Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for compressed air...
Reduction with pipe thread G1/8" - G1/4". Made of stainless steel 1.4571. Designed for operations with high demands on durability, longevity and hygiene. Recommended...
Socket couplings with reduced dimensions and weight, for quick and easy assembly of plastic tubing Designed especially for automation, measuring and control technology and...
Ball valves PN 16, for waterFull-flow ball valves, lever or lever handle operationBody, threaded part and ball made of brass MS58, operating lever in redShaft sealing by means...
High quality yellow spiral hose 12/8 mm with extreme spiral return capability of 7.5 m and long life without quick couplers. Made of branded granular elastollan 1190. Designed...
Screwdriver with shank with female thread 9 - G1/8". Made of pure brass MS 58, designed for the production of fittings. Supplied with external pipe threads. Designed for...
Ball valve series PF Airnet with 40 mm couplings. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70...
AAFC cyclone separator in 1" design with a flow rate of 3,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Reducer with external American thread NPT 1/8" to internal pipe thread G 1/8". Made of pure brass MS 58, designed for the production of fittings up to a maximum pressure of 10...
Hardened nuts with shortened height for high tightening torques. For impact wrenches with 1/2" clamping square for 15 mm screws.
Protective cap - Overpressure - DRSB. Designed for non-aggressive fluids : hydraulic oil, air, water, oil emulsions. Switching differential from 15 to 20%, IP65 protection,...
Deformation hose coupling EWD1 with a range of 28 to 31 mm. It allows very inexpensive connection of hoses with small diameters. Made of material W1 - white galvanized steel....
Quick coupling with straight shank for standard 13 mm hose without valve with 13 mm nipple. Made of brass MS58 and 2.0401. Adjustable flow to free flow, double-sided and...
Pressure hose with hose diameter 17/10 mm in black with blue stripe. Designed primarily for the transport of hot media - water, air and chemicals, especially in the plastics...
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1" version can filter 7,000 l/min of air compressed to a...
Nipple with external thread R1/2". Robust couplings with optimum sealing. Designed for compressed air in industry and crafts, especially when using pneumatic tools with high...
Nipple with male thread R3/4". Robust couplings with optimum sealing. Designed for compressed air in industry and crafts, especially when using pneumatic tools with high...
Air pressure regulator with metal filter up to 18 bar. Compressed air control with 850 l/min flow rate in 1 thread 1/4" size. Regulation range 0 - 12 bar. Filtration capacity 20...
High-quality bayonet coupling with external thread G 1/2" according to DIN 3489 (formerly DIN 3481) for a stable compressed air connection system.For a simple and fast...