Filtration, regulation and treatment of compressed air, Page 14
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...
Differential indicator for filter cartridge clogging for Futura treatment units. Easy installation with indicators based on differential pressure.
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 380 m³/h (6,333 l/min) and connection via external thread G1...
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
Regulator with inlet up to 25 bar 1/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Adsorption dryer BDRY-300 designed for permanent separation of water vapour from compressed air with a flow rate of up to 4,183 l/min at a maximum pressure of 16 bar and...
Compressed air microfilter 0,01 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 300 l/min. Design according to ATEX II 2G2D. Maximum inlet...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
High flow silencer with external pipe thread G 3/4" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....
Basic 5 um air filter with 1/4" connection for compressed air and for neutral gases with a flow rate of 2,200 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...
High-flow silencer with external pipe thread G 1 1/4" designed especially for compressed air expansion during regeneration and ventilation of production columns of adsorption...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-335 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Fixing bracket with screws under the cover of the FUTURA size 4 unit. All modules of FUTURA units can be mounted in this way. Easily mounted with wall bracket and similar mounting.
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement container for FUTURA FA filters in size 2 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
Replacement container for FUTURA filters in size 4 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...
Connection cable 5 m - with straight connector designed for proportional DRPE controllers. Operating temperature -10 to +60 °C. Electrical protection IP65. Connection - 4-pole...
Connection cable 5 m - with angled connector designed for proportional DRPE controllers. Operating temperature -10 to +60 °C. Electrical protection IP65. Connection - 4-pole M12...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
Replacement container for OL lubricator in size 1. For refilling oil to lubricate compressed air, e.g. for pneumatic tools. Suitable only for FUTURA series air handling units.
Mounting bracket with size 2 lock nut for FUTURA air handling units. Installation for pressure regulator or pressure regulator with filter. Simple attachment with a bracket. The...
Mounting angle for compressed air treatment units in Combibloc design from EWO.
Replacement container for FUTURA FA filters in size 1 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...
The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...
Standard connection set for FUTURA size 4 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
40 micron filter insert for compressed air treatment units in Combibloc design from EWO.
Replacement container for FUTURA FA filters in size 4 without condensate drain. The activated carbon in the filter only absorbs aerosols. When the liner becomes clogged, it...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 72 m³/hr from the compressor at a 3°C dew point enables use in...
Replacement container for OL lubricator in size 2. For refilling oil to lubricate compressed air, e.g. for pneumatic tools. Suitable only for FUTURA series air handling units.
Replacement container for OL grease gun in size 4. For refilling oil to lubricate compressed air, e.g. for pneumatic tools. Suitable only for FUTURA series air handling units.
Replacement container for FUTURA filters in size 2 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 42 m³/hr from the compressor at a 3°C dew point enables use in...
Replacement filter cartridge 5 um for basic filter of FUTURA series - F14-F and F38-F. The filter insert can be easily replaced.
AAFS 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...