Filtration, regulation and treatment of compressed air, Page 17
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Protective basket for compressed air treatment units in Combibloc design from EWO.
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-510. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Protective basket for compressed air treatment units in Combibloc design from EWO.
Stainless steel cyclone separator IHP1 with 3/8" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Filter cartridge for medical vacuum filter MVAC-0076V . Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 163 l/min.
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 1825 l/min with automatic condensate drainage...
Replacement plastic container with automatic drainage for compressed air treatment units in Combibloc design from EWO.
Regulator with inlet up to 25 bar 3/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Replacement plastic container with manual release for compressed air treatment units in Combibloc design from EWO.
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 2200 l/min with automatic condensate drainage...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 3000 l/min with automatic condensate drainage...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 3600 l/min with automatic condensate drainage...
Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 4100 l/min with automatic condensate drainage...
AAFS 2" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
40 micron filter insert for compressed air treatment units in Combibloc design from EWO.
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-780. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Cyclone separator CSSS with flange connection DN200. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN80...
Replacement cartridge WOS-8A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
Replacement cartridge WOS-8P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
Container MVAC-N3 for medical vacuum filters MVAC-B240 to B600. Applications mainly in medical devices.
Replacement plastic container with automatic drainage for compressed air treatment units in Combibloc design from EWO.
Replacement plastic container with manual release for compressed air treatment units in Combibloc design from EWO.
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with G 1 1/4" inlet and 0,5 - 25 Bar outlet pressure regulation. Maximum inlet...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 3 bar up to a flow rate...
Regulator with inlet up to 25 bar 1/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...
Container MVAC-N2 for medical vacuum filters MVAC-0946 to 2406. Applications mainly in medical devices.
Catalytic filters (hopcalite) AAFH2 in 1 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-24 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
Measuring chamber for dew point sensor - for regeneration air saving - BDRY-MK. B-DRY dryers can operate in two operating modes depending on the settings of the control unit....
Connection set of FUTURA air handling units with wall bracket size 4. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Cyclone separator SFH with flange connection DN150. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Controller diaphragm for compressed air treatment units in Combibloc design from EWO.
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN125 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Connection by flange with DN150 clearance....
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN125...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by flange with DN150...
The filters are used to remove the smallest mechanical impurities from compressed air up to 0.1 um and oil according to ISO 8573-1 class 2. Connection by flange with DN150...
Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 3/4" and outlet pressure regulation 0,5 - 6 Bar. Maximum inlet...
The MDX1800 series condensation dryer with a maximum flow rate of 1,825 l/min and inlet pressure up to 16 bar is used to remove condensate and moisture from compressed air...