Filtration, regulation and treatment of compressed air, Page 19

AAFM pre-filter in 2 1/2" design to remove fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with G 1/4" inlet and 0,5 - 10 Bar outlet pressure regulation. Maximum inlet...

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Combibloc air treatment units. Unique solution of integrating pressure regulator, filter and oiler in a minimal footprint. Two bay sizes with different threaded connections....

Replacement container for FUTURA filters in size 1 with automatic condensate release by means of a float. Suitable only for FUTURA series air treatment filter units.

Differential pressure gauge to indicate filter cartridge clogging in FUTURA compressed air treatment units. Keep track of the need to change the filter cartridge and keep the...

High pressure regulator 1" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 0.5 - 12...

High pressure regulator 1" for pressure reduction of compressed air and other non-volatile and non-toxic gases. Maximum inlet pressure 60 bar with a control range of 1.0 - 20...

precision compressed air pressure regulator with 0.05 - 7 bar control. Inlet pressure up to 16 bar with a maximum flow rate of 950 l/min. Connection via 1/4". High-performance...

A-DRY adsorption dryers are equipped with the new generation ADC 4.0 electronic control unit. This version of the controller is easy to use and offers many innovative features....

Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-12 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...

Cyclone separator CSSS with flange connection DN80. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...

Small condensing dryer for removing moisture from compressed air from the compressor up to a dew point of +5°C. Maximum air flow of 600 l/min with automatic condensate drainage...

Regulator with inlet up to 40 bar for pressure reduction of compressed air and other and non-aggressive gases with inlet G 1/4". Outlet pressure control range 0,5 - 3 Bar....

Magnetic differential pressure gauge VPG60 for indication of filter cartridge blockage in vacuum systems with LED signaling. Designed for mounting from the top of the filters...

Cyclone separator CS with flange connection DN80. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...

After one year of service, the Omega Air BDRY-110 to BDRY-150 series adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement...

After one year of operation, the Omega Air BDRY-1200 Series Adsorption Dryer Service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...

After one year of operation, the Omega Air BDRY-200 to BDRY-250 series adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement...

After one year of operation, the Omega Air BDRY-300 to BDRY-400 series adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement...

After one year of operation, the Omega Air BDRY-600 Series Adsorption Dryer Service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...

Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...

Futura treatment units - Pressure regulators with air filtration, Designed for compressed air with or without oil and for neutral gases, Design according to ATEX II 2G2D,...

Replacement diaphragm for MADRY-12M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-24M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-18M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-6M compressed air dryer from compressor working on the principle of water separation by means of hollow fibre diaphragm.

Replacement diaphragm for MADRY-9M compressed air compressor membrane dryer working on the principle of water separation using a hollow fibre membrane.

Regulator with inlet up to 25 bar 3/4" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.6 to 6 bar up to a flow rate...

Service KIT after one year of operation Omega Air FDRY-2500-1R series adsorption dryer includes a replacement dust filter microfilter cartridge and replacement silencers for...

precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.5 to 10 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....

Service kit for activated carbon column TACM-105. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption processes.

Service kit for the TACM-150 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption...

Service kit for the TACM-200 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption...

Service kit for the TACM-70 activated carbon column. Activated carbon is a material in the form of small pellets designed to purify compressed air and gases in adsorption...

The TACM-23 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 400 l/min at a maximum...

The TACM-35 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 600 l/min at a maximum...