Filtration, regulation and treatment of compressed air, Page 2
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
Bestsellers

Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 650 l/min in 1/4" size. Application mainly in industry, laboratory,...

AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...

Air treatment units A1. Simple air filtration at 5 um. Filter design 1/4" with air flow 800 l/min. Semi-automatic condensate discharge in the flask.

Replacement diaphragm for A2 - A2MR-12 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...

Compressed air treatment units in plastic design up to 13 bar. Compressed air regulation from 0 to 8 atmospheres with a maximum flow rate of 600 l/min. Connection via 1/8" pipe...

Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.

The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/2" version can filter 4,000 l/min of air compressed to a...

The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with G 1" inlet and outlet pressure regulation 0,5 - 25 Bar. Maximum inlet pressure...

Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 2,500 l/min in size 2 with 1/2" thread. Regulation range 0...

Prefilter for compressed air from Hankison NGF series of HF type according to ISO. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and...

Fixing angle for air handling units A2F-12, A2L-12. Attachment of filters and lubricator of A2F units to the unit body.

Air pressure regulator with metal filter up to 18 bar. Compressed air control with 850 l/min flow rate in 1 thread 1/4" size. Regulation range 0 - 12 bar. Filtration capacity 20...

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/8"-1/2" as replacement insert for FDM and FWA air filters.

Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and an automatic...

Standard connection set for FUTURA size 2 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...

Microfilter in metal version up to 18 bar with 0,01 µm liner, flow rate 1 750 l/min in size 1 with 1/4" thread atdesigned for very gentle removal of solid dirt, water and oil...

Regulator for pressure reduction of compressed air and other non-volatile and non-toxic gases with inlet G 1/2" with outlet pressure regulation 0,5 - 25 Bar. Maximum inlet...

Replacement container for lubrication unit A2 - A2NL-38. Simple container change with lock on the following units: A2L-38, A2U-38.

The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1/4" version can filter 750 l/min of air compressed to a...

Replacement diaphragm for A2 - A2MR-38 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...

The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...

AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....

Connection set of FUTURA air handling units with wall bracket size 1. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...

The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...

Compressed air condensation dryer for dew point +3°C. Maximum inlet pressure is 14 bar with a flow rate of up to 35 m³/hr (583 l/min) and connection via external thread G3/8"....

Fixing angle for air handling units A2F-14, A2L-14. Attachment of filters and lubricator of A2F units to the unit body.

Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...

Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-24 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...

Replacement cartridge WOSM-2AP for water-oil separators. Combined filtration with activated carbon and PP cartridge. Residual oil less than 20 ppm. The maximum flow rate is 2000...

Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-35 and AAFM-60 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...

The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...

Replacement diaphragm for A2 - A2MR-14 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...

Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...

Air treatment units A1. Simple air filtration at 5 um. Filter design 3/8" with air flow 1 700 l/min. Semi-automatic condensate discharge in the flask.

Connection set of FUTURA air handling units with wall bracket size 2. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...

Replacement oil seal for METAL WORK compact filters size 1/8" - 1/4".

Mounting angle for air handling units A2F-38, A2L-38. Attachment of filters and lubricator of A2F units to the unit body.