Filtration, regulation and treatment of compressed air, Page 3
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Air treatment units A1. Simple air filtration at 5 um. Filter design 1/4" with air flow 800 l/min. Semi-automatic condensate discharge in the flask.
Fixing angle for air treatment units A2R-12, A2S-12. Attachment by means of a lock nut on the pressure regulator.
The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement container for filter unit A2 - A2NF-38. Simple container change with lock on the following units: A2F-38, A2S-38, A2U-38.
Microfilter in metal version up to 18 bar with 0,01 µm liner, flow rate 1 750 l/min in size 1 with 1/4" thread atdesigned for very gentle removal of solid dirt, water and oil...
Basic AFP filters according to ISO 8573.1 with a filtration capacity of 3 um and an efficiency of 99.9%. FPRO filters are used to remove the largest mechanical impurities from...
Replacement container for lubrication unit A2 - A2NL-10. Simple container change with lock on the following units: A2L-10, A2U-10.
Mounting angle for air handling units A2R-38, A2S-38. Attachment by means of a lock nut on the pressure regulator.
Compressed air treatment units in metal design up to 18 bar. Compressed air control with 700 l/min flow rate in 1/4" size. Application mainly in industry, laboratory, measuring...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging indicator and an...
Air treatment units A1. Simple compressed air regulation with AR pressure regulators in 1/4" design with 55 l/min air flow. Included in the delivery is a pressure gauge and...
Replacement cartridge WOS-4A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
Replacement cartridge WOS-4P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 4000 l/min.
Hub module size 2 air handling units - B2 allow air sampling with certain parameters inside the modular series. Tapping output via 4 x 1/4" thread. Mthe possibility of taking...
Size 1 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting units in sizes 3/8"-1/2".
Replacement container for lubrication unit A2 - A2NL-14. Simple container change with lock on the following units: A2L-14, A2U-14.
Replacement cartridge WOS-8P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 8000 l/min.
Replacement cartridge WOSM-1AP for water-oil separators. Combined filtration with activated carbon and PP cartridge. Residual oil less than 20 ppm. The maximum flow rate is 1000...
Air pressure regulator with metal filter up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 3/4" thread. Regulation range 0 - 12 bar. Filtration...
Replacement cartridge WOS-20A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 20,000 l/min.
Replacement cartridge WOS-20P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 20000 l/min.
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-24 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
Standard connection set for FUTURA size 2 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 1" thread. Application mainly in industry, laboratory, measuring and control technology.
AAFR dust filter in 2" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
Replacement cartridge WOS-35P for water-oil separators. Filtration via PP filter insert. Residual oil less than 10 ppm. The maximum flow rate is 35,000 l/min.
Replacement diaphragm for A2 - A2MR-14 pressure regulators. Simple diaphragm exchange for re-adjusting the air pressure from 0.5 - 8 bar. Suitable for the following units :...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water oil FOD separatorsDischarging condensate directly into the sewer is illegal and the condensate must be disposed of as oilWater oil FOD separators separate water and...
Replacement filter insert 20 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.
Replacement filter insert 5 um for compact filters 1/8" - 1/4" as replacement insert for FDM and FWA air filters.
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.1 to 3 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Mounting angle for air handling units A2F-38, A2L-38. Attachment of filters and lubricator of A2F units to the unit body.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 1/4" as replacement insert for FDM and FWA air filters.
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 1/2" thread. Application mainly in industry, laboratory, measuring and control...